Draino is mostly caustic soda which is a base.
Drano is not hydrochloric acid... Drano is the exact opposite. It's a base. This is why people end up doing stupid stuff and getting chemical burns on their face. If you think Drano is the same as HCI, then mix some Drano and HCI. If your right and its the same thing, nothing will happen. (Hint: Make sure you have somebody standing by to drive you the the hospital after you mix it).
Drano was created in 1923.
No, there should be no gas formed when mixing Drano and vinegar. The main ingredient in Drano is NaOH, and vinegar is acetic acid. So, the chemical reaction would be...NaOH + CH3COOH ==> CH3COONa + H2O. Neither is a gas.
Drano is an alkaline cleaner.
The active ingredients in Drano are typically sodium hydroxide (lye), sodium hypochlorite (bleach), and aluminum. These chemicals work together to break down clogs in drains by dissolving organic material.
No, it is a base.
Yes, Drano is an alkaline substance used as a drain cleaner. It typically contains sodium hydroxide or potassium hydroxide, which are strong bases, rather than acids.
Drano is a hydrochloric acid chemical used to clean out drains, but every great plumber out there knows its dangers and stays away from drano.Drano can also be used to make a bomb . all you need is drano a water bottle and aluminim foil. cap the bottle once all ingredents are in shake and throw . will cause it to explode do no touch the acid on the inside of the bottle will burn skin off!!!!!!!!!!Drano is not hydrochloric acid... Drano is the exact opposite. It's a base. This is why people end up doing stupid stuff and getting chemical burns on their face. If you think Drano is the same as HCI, then mix some Drano and HCI. If your right and its the same thing, nothing will happen. (Hint: Make sure you have somebody standing by to drive you the the hospital after you mix it).
To determine the percentage of sodium hydroxide in solid Drano, you can first dissolve a known mass of Drano in water and then titrate the solution with a standardized acid solution (e.g., hydrochloric acid). The amount of acid needed to neutralize the sodium hydroxide in the Drano solution can be used to calculate the percentage of sodium hydroxide in the original solid.
Yes, the main ingredient in Drano is sodium hydroxide, a strong base.
The base found in Drano is typically sodium hydroxide, also known as lye or caustic soda. It is a highly alkaline substance that helps break down and dissolve organic matter in clogged drains.
Drano is not hydrochloric acid... Drano is the exact opposite. It's a base. This is why people end up doing stupid stuff and getting chemical burns on their face. If you think Drano is the same as HCI, then mix some Drano and HCI. If your right and its the same thing, nothing will happen. (Hint: Make sure you have somebody standing by to drive you the the hospital after you mix it).
An example of a common acid would be soda, distilled water, and different types of vinegar. Some examples of common bases would be baking soda, Drano, and egg whites.
Battery acid is Sulfuric acid and Drano is 54.2 %Sodium hydroxide Sulfuric acid is a strong acid which can damage skin and your eyes. Drano is 54.2 % Sodium hydroxide which is lye. Lye is used to make lye soap. Lye reacts with oils and fats to make soap. You have oils on your skin.
An example of a common acid would be soda, distilled water, and different types of vinegar. Some examples of common bases would be baking soda, Drano, and egg whites.
A base, perhaps sodium hydroxide. When in solution this base ionizes into charged atoms that are attracted to the material clogging the drain and also disrupting it's atom structure so that it degrades enough to unclog the drain.
Drano itself is a mixture, but the main active ingredient is sodium hydroxide.