0
What else can I help you with?
Can we use fluorescent lamp in dc?
Yes, fluorescent lamps may be powered by DC but they need a DC lamp controller instead of an AC ballast and starter. The DC lamp controller is more complex. I have a 12V lantern with fluorescent lamp tubes.
Does fluorescent lamp work by DC voltage?
Fluorescent lamps can be used in the District of Columbia.If you were really asking if they can be supplied with direct current, the answer is yes, but they really don't like it. They prefer to be supplied with alternating current, or AC, so you'd have to "chop" the DC or use it to drive an inverter, which will change the DC into AC.There are florescent lamps and CFL's made specifically for 12 and 48 VDC applications available through specialty alternative energy stores.
Do phones use ac or dc?
Some devices operate on AC and others on DC. Generally, anything that uses mains electricity (120V US, 240V UK) is using AC electricity and things that use batteries or are rechargable like cell phones, ipods, personal CD, use DC electricity.
Is home elect ac currant?
DC current is not used in home wiring. It may be used to power a door bell, alarm system, under counter lights, etc, that uses a transformer powered by AC that converts the power to DC. Other than that homes are wired for AC current only.
Can you use an AC Dimmer Switch on a DC fan?
No, an AC dimmer switch is designed to work with AC-powered devices, not DC. DC fans require a different type of dimmer switch specifically rated for DC power. Using an AC dimmer switch on a DC fan can potentially damage the fan or the switch itself.
If AC is replaced by DC in a fluorescent lamp circuit will the circuit work?
No.
Can we use fluorescent lamp in dc?
Yes, fluorescent lamps may be powered by DC but they need a DC lamp controller instead of an AC ballast and starter. The DC lamp controller is more complex. I have a 12V lantern with fluorescent lamp tubes.
Can we use a fluorescent lamp in DC?
Yes, fluorescent lamps may be powered by DC but they need a DC lamp controller instead of an AC ballast and starter. The DC lamp controller is more complex. I have a 12V lantern with fluorescent lamp tubes.
Would ac or dc be better in lighting circuits in parallel?
Depends on the application. Lights in your house are in parallel with AC and lights in your car are in parallel with DC.
Are Christmas lights ac or dc current?
Christmas light have always been AC.
Is there a difference with AC or DC output of Xenon lights?
yes, there is a difference.. you cant get a maximum focus in AC but when DC is used you can get maximum focus..
Does a fluorescent ballast work in a DC V supply?
No, fluorescent ballasts are designed to work with AC voltage supplies. They require the alternating current to function properly and cannot operate on a direct current (DC) power source.
What changes are to be made for a fluorescent lamp circuit to work if ac supply is replaced by dc?
A fluorescent light fixture is designed to operate on an AC voltage supply. To have the fixture operate off of a DC supply a power inverter would have to be installed. The power inverter would then change the DC to AC for the fixture to operate. These power inverters are reasonably priced these days and can be bought at most DIY stores.
Does tube light work with ac or dc?
Fluorescent lights work just fine on DC voltage, BUT one needs a current limited power source to stabilize the circuit against the negative resistance of the gas discharge. This can be done with either a resistor or an electronic circuit. The resistor solution is too lossy because excess voltage from the dc csupply has to be converted to heat across the resistor. Electronic switching supplies could supply a fluorescent light with a dc voltage and current without the losses. But that's technological overkill and most circuits still supply AC.
Do strobe lights use ac or dc current to flash?
Strobe lights use ac or alternating current to flash. The frequency of 50 Hz is alternating current's frequency, coming in handy for its flashing.
Ac to DC formula?
formula for ac to dc
Is there any possibilty of ac and DC flows in conductor at a time and get DC and AC with two reference AC and DC?
A typical AC waveform is symmetrical about a zero crossing point. You can bias the AC with DC such that the AC waveform is symmetrical about the DC voltage.
