yes
Yes, because it's part of the silicon family. It's silicon dioxide. I'm still figuring out if you need a machine or not
You have some serious wiring problems, for sure. My first guess is that your grounding conductor and neutral are touching somewhere and your ground is acting as the neutral when the neutral is disconnected. The light coming on when the hair dryer is used is another mystery. You need to hire a competent electrician to trouble shoot these problems.
A object without electrical charges.
Cellular respiration is possible without photosynthesis in an organism but photosynthesis is not possible without cellular respiration.
If the meter has 208-240V coming to it, no the neutral doesn't go through the meter. If the meter has only 120V incoming power such as many RV parks then the neutral does go to the line side of the meter or it won't work.
Yes. Connect it poperly or not at all. If in the slightest doubt, call an electrican.
That isn't possible, not with a simple machine and not with a complicated machine, since otherwise, conservation of energy would be violated.
Assuming that by CPU you are referring to a separate desktop machine, you can use a crossover ethernet cable to connect them directly
Teleportation without a machine is currently not possible as it defies the laws of physics. The concept of teleportation is often seen in science fiction but has not been achieved in real life due to the complexity of transferring matter from one point to another instantly.
this is not possible unless it is in a 3-d dimension
It is not possible to open an ATM machine without a password. You have insert your credit card and password in order for it to work.
If you are using the Windows operating system then it is possible. If you are using Mac OS X then it is not possible.
Wireless made it possible to access the Internet without needing wires to connect. It also made cell phones possible.
no bt u can connect it very easily using 4 port switch
Measure ... no. But you can estimate it quite well by eye.
Yes, static electricity
The sewing machine is put into neutral by disengaging the drive mechanism that connects the motor to the needle or feed dogs. This is typically done by adjusting a lever or switch, allowing the machine to run without stitching, which is useful for winding bobbins or troubleshooting. In some models, this may also involve moving the handwheel or turning a specific knob. Always consult the user manual for specific instructions related to your machine.