0
Scientists have created a camera that has the ability to take 1012 (That is 1 with 12 zeros) FPS. And with a short enough pulse from a laser, they have the ability to watch the small beam move through space. You can see the research and many videos of this taking place on http://web.media.mit.edu/~raskar//trillionfps/ .
This should answer your question thoroughly.
What else can I help you with?
Is it possible to get more speed then light to the particle with accelerator?
No, according to the theory of relativity, it is impossible for any particle with mass to reach or exceed the speed of light. Accelerators can increase the speed of particles to high fractions of the speed of light, but they cannot exceed it.
What voltage is needed to accelerate electrons to 1.5 times the speed of light in a CRT?
It is not possible to accelerate electrons--or anything else--to the speed of light, much less to 1.5 times the speed of light. Nominal operating voltages for a CRT range from a couple of thousand volts to a few tens of thousands of volts, depending on the application.
What is 300000 kps?
300000 kps likely refers to 300,000 kilometers per second, which is an extremely high speed that is faster than the speed of light. This speed is not achievable with our current technology or understanding of physics.
How does mass turn into infinity at the speed of light?
It doesn't - the object will never achieve the speed of light, since an infinite mass is not possible (it would require infinite energy). This only describes a tendency: as the object gets closer and closer to the speed of light, so, too, will its mass increase more and more, approaching infinity - this means there is no upper limit to the mass as the object approaches the speed of light.
Can the speed of light be measured accurately by the naked eye?
No, the speed of light cannot be accurately measured by the naked eye. While humans can observe the effects of light, such as seeing a flash or a distant object, our perception is not precise enough to measure the speed of light. Accurate measurements require specialized equipment, such as lasers and high-speed cameras, to capture and analyze light's behavior.
Does a high shutter speed cause grain in photographs?
A high shutter speed does not directly cause grain in photographs. Graininess in photos is typically caused by a high ISO setting, which increases the camera's sensitivity to light.
How can I achieve high-speed sync with a Nikon camera using Yongnuo flash equipment?
To achieve high-speed sync with a Nikon camera using Yongnuo flash equipment, you need to make sure that both the camera and flash are compatible with high-speed sync. Set your camera to high-speed sync mode and adjust the flash settings accordingly. Ensure that the flash is capable of high-speed sync and set it to the appropriate mode. Sync the flash with the camera and test to ensure that high-speed sync is working properly.
What are the essential film camera settings for capturing high-quality images?
The essential film camera settings for capturing high-quality images include adjusting the aperture, shutter speed, and ISO. The aperture controls the amount of light entering the camera, the shutter speed determines how long the light is exposed to the film, and the ISO setting affects the camera's sensitivity to light. By properly adjusting these settings, you can achieve sharp, well-exposed images with good color and contrast.
Where do you buy a high speed camera?
At the store.
How does a gasto speed camera work?
A speed camera work when a driver is on high speed then the speed camera will take a shot of the car witch will have the number plate then they will be able to find all the information on the driver…
A tourist drops a camera from 20meter high bridge what is the speed of the camera as it hits the water?
more information is needed, such as weight of the camers, shape of the camera, and the wind speed
What are the best low light camera settings to use for capturing high-quality images in dark environments?
To capture high-quality images in dark environments, use a wide aperture (low f-stop), slow shutter speed, and higher ISO settings on your camera. This combination allows more light to enter the camera, resulting in brighter and clearer images in low light conditions.
Is it possible to get more speed then light to the particle with accelerator?
No, according to the theory of relativity, it is impossible for any particle with mass to reach or exceed the speed of light. Accelerators can increase the speed of particles to high fractions of the speed of light, but they cannot exceed it.
What are the best techniques for capturing high exposure photography in low light conditions?
To capture high exposure photography in low light conditions, use a tripod to stabilize the camera, set a low aperture for more light, increase the ISO for sensitivity, and use a longer shutter speed to let in more light. Additionally, consider using a remote shutter release to minimize camera shake.
Is it possible to get high speed internet from a satellite service?
It is possible. If you have a good computer, and your satellite provider is decent, then you can have high speed internet. However, you must specify what you feel is "high speed".
What features are found on a Panasonic Lumix camera?
The Panasonic Lumix camera has a 14.1 megapixal high sensitivity MOS sensor, a 20x optical zoom, 3inch digital screen, manual exposure controls and light speed autofocus.
What are the best camera lighting settings to use for capturing high-quality photographs?
The best camera lighting settings for capturing high-quality photographs typically involve using a low ISO setting, a moderate aperture setting, and adjusting the shutter speed based on the available light. Additionally, using natural light or soft artificial light sources can help achieve better results.
