0
What else can I help you with?
What is the function of deionized water in determination of ash content?
Ash content is determined by calcination and deionized water is not necessary.
Why we should never handle electrical appliances with wet hands?
Because water is a conductor, and water dripping from your hands may drip down to an energized circuit, and effectively create a trail from that circuit to your hands, causing you to get electrocuted.
When glucose mix with dis-odium hydrogen phosphate with deionized water what happen?
When glucose is mixed with dis-odium hydrogen phosphate with deionized water, there will be a chemical reaction. The deionized water acts as a catalyst to create the foaming that will occur.
What color does universal indicator turn in deionized water?
since water is pretty neutral, the water does not change color but the universal indicator does. The universal indicator changes color as per the quantity of deionized water... But it changes to straw color or pale yellow in 50mL of deionized water.
Why is accumulation of moisture in electrical appliances dangerous?
The water can cause circuits to short or ground out, with hazards of electrical shocks or fires.
Why the deionised water still can be dangerous with the electrical appliances?
Even deionized water can be dangerous with electrical appliances because many such appliances contain nearby surfaces with a sufficiently high electrical potential difference between them to ionize water itself and thereby make the water electrically conducting.
Can you use deionized water in tattooing instead of distilled?
Yes. Essentialy deionized and distilled water are the same because distilled water is just water that has all ions taken out and therefore wont carry and electrical charge.
How to test the purity of deionized water?
To test the purity of deionized water, you can use a conductivity meter to measure the electrical conductivity. The lower the conductivity, the purer the water. Additionally, you can use a Total Organic Carbon (TOC) analyzer to check for organic impurities. Conducting these tests will help determine the purity of deionized water.
What is the resistivity of deionized water and how does it affect the conductivity of the solution?
The resistivity of deionized water is high due to the absence of ions. This means it has low conductivity because there are fewer charged particles to carry electrical current.
How does water kill electrical appliances?
Water condutes electrcity
Which the highest conductivity between tap water and deionized water and why?
Tap Water has higher conductivity compared to deionized water since it has more mineral/ salts. Deionized water has less/ no minerals to conduct electrical current. One can experiment this in a your Water Fuel Cell using deionized water, tap water and water with salts like (KOH or NaOH) or sea water.Nitinwww.HydroxyGarage.comWater Fuel Technology is Here !!!
Is deionized water an element?
The deionized water is not an element, but it is a very pure water, without ions in solution.
Is distilled water the same as deionized water?
No, distilled water and deionized water are not the same. Distilled water is created by boiling water and collecting the steam, while deionized water is purified by removing ions and minerals.
What is the resistivity of deionized water?
The resistivity of deionized water is typically around 18.2 megaohm-cm.
Is deionized water a mixture?
No, deionized water is not a mixture. It is a type of water that has had its ions (charged particles) removed through a process called deionization, resulting in a more pure form of water with a neutral pH.
What might occur if electrical appliances are used near water?
you will DIE
Why should electrical appliances not be used near water?
Because it can kill you.
