0
Yes, because a gas is burned - an oxydation reaction.
This chemical reaction produces heat as well as carbon dioxide and water vapor as products from methane and oxygen gas. The heat also excites the electrons in the gases it produces, causing them to gain energy and rapidly emit this energy in the form of photons predominately with a wavelength of approximately 475 nm, which we perceive as blue light.
The reaction can be described by the following equation:
CH4 (g) + 2 O2 (g) => CO2 (g) + 2 H2O (g)
What else can I help you with?
What happens when you put iron wool in a Bunsen burner?
When iron wool is placed in a Bunsen burner flame, it undergoes a chemical reaction called oxidation. The iron in the wool combines with oxygen from the air to form iron oxide, which produces sparks and a glowing effect.
Is the Bunsen burner made for experiments or by accident?
The Bunsen burner was intentionally designed by Robert Bunsen in the 19th century for laboratory experiments. It was created to produce a hot, clean flame for heating, sterilizing, and performing chemical reactions in a controlled manner.
When did Michael Faraday invent the Bunsen Burner?
Michael Faraday did not invent the Bunsen Burner. It was actually invented by German chemist Robert Wilhelm Bunsen in the 19th century. Bunsen invented the burner in 1855 as a more controlled and efficient way of producing a flame for chemical experiments.
Why did Robert Bunsen improve the Bunsen burner?
He was a pioneer in Photo Chemistry and also in Organoarsenic chemistry
Did Robert Bunsen make the Bunsen burner?
No, Robert Bunsen did not invent the Bunsen burner. It was actually invented by Michael Faraday in the 19th century. The Bunsen burner is named after Bunsen as he helped popularize its use in laboratories.
What is the name of the chemical reaction happening inside a Bunsen burner?
Combustion.
Is striking a match to a Bunsen burner a chemical reaCTION?
Striking a match initiates a chemical reacftion (burning). The proximity of the Bunsen burner has nothing to do with it.
Is the Bunsen burner.....?
an exothermic reaction or and enothermic reaction
Select the correct sequence of steps for lighting a Bunsen burner. A. Apply the spark above the barrel of the Bunsen burner. B. Open the gas adjustment at the base of the Bunsen burner. C. Connect the?
The correct sequence of steps for lighting a Bunsen burner is: B. Open the gas adjustment at the base of the Bunsen burner first, followed by C. Connect the gas supply. Finally, A. Apply the spark above the barrel of the Bunsen burner to ignite the gas.
How was a Bunsen burner made?
The Bunsen burner was the result of a building lighting approach that Robert Bunsen was trying to implement in a new laboratory building he was entrusted to design for the University of Heidelberg. The building had a gas supply which was thought to be useful for creating heating and lighting capabilities. The Bunsen burner was to regulate this gas supply for these purposes.
What happens when you put iron wool in a Bunsen burner?
When iron wool is placed in a Bunsen burner flame, it undergoes a chemical reaction called oxidation. The iron in the wool combines with oxygen from the air to form iron oxide, which produces sparks and a glowing effect.
When a substance is placed over a Bunsen burner it?
typically undergoes heating and may undergo a phase change or chemical reaction depending on its properties. The Bunsen burner provides a consistent and controlled source of heat to increase the temperature of the substance, allowing for various processes such as evaporation, combustion, or decomposition to occur.
What is used to make a spark when lighting a Bunsen burner?
A flint is commonly used.
When would a Bunsen burner be used?
To heat-start a chemical reaction. Also it can be used for flame testing of cations. Modern labs. used electric or steam mantles for heating a reaction, because the temperature can be controlled. The Bunsen burner was invented by the German Chemist, Robert Chemist, in the late 19th century, before e;ectric/steam mantles were invented.
What happens with a copper wire and a Bunsen burner equation?
When a copper wire is heated with a Bunsen burner, it undergoes oxidation as it reacts with oxygen in the air, forming copper(II) oxide (CuO) on its surface. The balanced chemical equation for this reaction is: 2Cu + O2 -> 2CuO.
When did Robert Bunsen invent the Bunsen burner?
Robert Bunsen invented the Bunsen Burner in 1867.
How long did it take to invent the Bunsen burner?
The Bunsen burner was invented by German chemist Robert Bunsen and his assistant Peter Desaga in 1854. The invention of the Bunsen burner revolutionized laboratory work by providing a controlled source of heat for chemical experiments.
