0
What else can I help you with?
Have 110volt refrigerator on a 30 amp breaker is that right?
Check the MFG for the amps it uses, if it is suppose to be on a regular 20amp line, then replace the breaker with a 20amp breaker. With the 30amp breaker,it will work, but if there is a surge, you could send too much power to the appliance and fry it. Most refrigerators, are just on a regular 120v household outlet. Besides a 30amp breaker must have 10ga wire, if the wire is 12ga,it can not be attached to a 30amp breaker.
Can you put 20amp breaker on 10-2 wire?
No, you should match the breaker size to the wire gauge. A 10-2 wire is typically rated for a 30 amp breaker. Using a 20 amp breaker on 10-2 wire could result in overheating and a potential fire hazard.
Can you switch from 15amp to 20amp on a double pole breaker?
The minimum size wire a 20 amp breaker needs to be connected to is a #12 wire. The 15 is probably connected to a #14 right now which is only rated for 15 amps. Remember the breaker is sized to the wires ampacity not the load .
Can you put a 20amp water pump and a 30 amp water heater on a 50amp breaker?
No, it is not safe to put a 20 amp water pump and a 30 amp water heater on a 50 amp breaker. The total amperage exceeds the capacity of the breaker, which can lead to overheating, tripping, or even a fire hazard. It is recommended to have separate dedicated circuits for each appliance to ensure safety and proper functionality.
Can I add a circuit breaker wired in parrell to a current breaker to reduce the load on the breaker?
No, add new breaker,find a junction box and split the series, or add a box and split the load. You only need to do this if the breaker is tripping from overload. 12ga wire should have a 20amp breaker not a 15amp. If I understand your question,wired in parallel, this would be one hot connected to two breakers, first off two breakers is 220v not 120v , and 220v has two hot wires. Never connect two breakers together on one line.
Can you use 14-3 wire on a 20amp breaker?
No. A 20 amp breaker needs 12 gauge wire.
What type of circuit has double 20amp breaker going to a separate box at that separate box there is a well pump with another 20amp breaker to that?
Sounds like a 240 volt sub panel feeding a well pump.
How many air conditioners window units can fit on a single 20amp breaker?
Typically one.
Have 110volt refrigerator on a 30 amp breaker is that right?
Check the MFG for the amps it uses, if it is suppose to be on a regular 20amp line, then replace the breaker with a 20amp breaker. With the 30amp breaker,it will work, but if there is a surge, you could send too much power to the appliance and fry it. Most refrigerators, are just on a regular 120v household outlet. Besides a 30amp breaker must have 10ga wire, if the wire is 12ga,it can not be attached to a 30amp breaker.
Can you put 20amp breaker on 10-2 wire?
No, you should match the breaker size to the wire gauge. A 10-2 wire is typically rated for a 30 amp breaker. Using a 20 amp breaker on 10-2 wire could result in overheating and a potential fire hazard.
Can you switch from 15amp to 20amp on a double pole breaker?
The minimum size wire a 20 amp breaker needs to be connected to is a #12 wire. The 15 is probably connected to a #14 right now which is only rated for 15 amps. Remember the breaker is sized to the wires ampacity not the load .
Will two 110v 20amp breaker give me what I need to make up a 230v 30 amp breaker?
No. The amps must be 30 on each leg and the toggles must be rigged so that if one trips then both trip. It is best to buy the correct 230 V breaker at 30 amps.
How many 20amp outlets in commercial building per circuit?
All depends on how big your main breaker is and what size wire you are using,one 20 amp outlet needs #12 wire not more than 50feet away from main breaker
Where is the fuse for the power windows located in a 1989 firebird?
ITS SHOULN'T BE JUST A FUSE IT SHOULD HAVE A CIRCUIT BREAKER TOO. THE CIRCUIT BREAKER OPENS IF YOU HOLD THE SWITCH TOO LONG. ITS 20AMP ON MOST CARS THAT I WORKED ON. ITS IN THE FUSEPANEL ON MUSTANGS. GOOD LUCK PAUL G
How do you upgrade the service from a 120V 100A circuit breaker to 240V 30A for appliances like ovens and dryers?
Have an electrician wire you a proper line for the appliance. You were just kidding about the 100A, right? 10, or 20amp, not 100.
What happens when a 20amp device connects to a 30amp receptacle and the power supply fails - will it trip the breaker?
Assuming you are referring to the power supply failing in your 20A device, it could cause the 30A breaker protecting the receptacle to trip. It depends on the mode of failure. It is easy to imagine a condition where a short in the power supply could cause a current in excess of 30A to flow to the device and trip the breaker.
Can you put a 20amp water pump and a 30 amp water heater on a 50amp breaker?
No, it is not safe to put a 20 amp water pump and a 30 amp water heater on a 50 amp breaker. The total amperage exceeds the capacity of the breaker, which can lead to overheating, tripping, or even a fire hazard. It is recommended to have separate dedicated circuits for each appliance to ensure safety and proper functionality.
