0
What else can I help you with?
When were breakers first used in electrical panels?
If you are talking about early electrical wiring the answer is no. Fuses were used. While they come in many different shapes, sizes and materials, in general a fuse is a device with a strip of a "sacrificial" material (such as zinc, copper, silver, aluminum or some alloy mix) enclosed within some non-combustible fixture or device that is designed to melt and create an open circuit if the current for which the fuse is rated is exceeded by a predetermined amount. By creating this opening in the circuit, the fuse as the "weakest link" protects the rest of the circuit or what is connected to it. While the speed, breaking capacity and reliability of fuses has improved over time, the basics have not. Circuit breakers are more sophisticated switched fuses that can be reset--unlike these original fuses which would need to be physically replaced when they were "blown".
What circuit breakers will interchange with Murray panel?
Legally, you must use the same brand breaker with the brand panel. They sell Murray breakers at your area electrical contractor shop, but used I am sure. However, square d homeline, siemens ite, GE, cutler hammer BR do fit but will void the UL listing and are dangerous to mix. Upgrade your panelboard. It is old.
Why does copper and silver bangles turn green and black respectivly after their worn for many days?
They Tarnish (this is like rusting in iron, but slower). The moisure in your sweat, the warmth in your skin and the oxygen in the air all start to react with the metals. With silver, this makes silver oxide and hydroxide. This is a very slow process and silver tarnishing is very slow. With copper, this moke black copper oxide and green copper hydroxide (comman name verdigris, means green/grey). This process is also slow, but faster than silver. You can see evidence of this on old bronze statues and copper domes, which go green with weather and time.
Circuit breakers on a 1999 Lexus es300?
I think you are speaking of the fuse holders. There is one under the hood for several functions, the bigger high amp features, alternator, and so on. Then there is one in the driver compartment, left of the steering wheel. These are the old wedge type fuses. Autozone has the big 100amp fuses for like $3.00 and change. No need to go to Toyota or Lexus dealer.
What are ship breakers?
Ship breakers are individuals or companies that dismantle old ships in order to salvage the valuable materials such as steel, copper, and aluminum. This process usually takes place in specialized shipbreaking yards where the ships are dismantled in an environmentally responsible manner. Ship breaking is often done in developing countries where labor is cheaper.
Will zinsco and gte circuit breakers interchange?
To my knowledge Zinsco/Sylvania breakers are the only breakers that will fit in a Zinsco panel. My recommendation as a journeyman electrician is to have your panel changed out. Those panels are old and outdated, not to mention replacement breakers are expensive. Most newer panels, and breakers are the cost of about 2 replacements.
What circuit breakers fit into an old Gould Panel GQF40MBB?
The Gould Panel GQF40MBB typically accommodates Gould or Siemens type circuit breakers. Common options include the GFCI, AFCI, and standard thermal magnetic breakers, specifically the GQ series. When replacing breakers, ensure they are compatible with the panel's specifications and ratings to maintain safety and functionality. Always consult the panel's documentation or a licensed electrician for precise recommendations.
What are the potential safety hazards associated with old style fuse box circuit breakers?
Old style fuse box circuit breakers can pose potential safety hazards due to their outdated design and technology. These hazards may include the risk of electrical fires, overloading circuits, inadequate protection against electrical faults, and difficulty in quickly shutting off power in case of emergencies. Upgrading to modern circuit breakers is recommended to improve safety and reduce the risk of electrical accidents.
What are the safety concerns associated with old circuit breaker types?
Old circuit breaker types may have safety concerns such as being prone to malfunctioning, failing to trip properly in case of a short circuit or overload, and potentially causing electrical fires. It is important to regularly inspect and upgrade old circuit breakers to ensure the safety of the electrical system.
When were breakers first used in electrical panels?
If you are talking about early electrical wiring the answer is no. Fuses were used. While they come in many different shapes, sizes and materials, in general a fuse is a device with a strip of a "sacrificial" material (such as zinc, copper, silver, aluminum or some alloy mix) enclosed within some non-combustible fixture or device that is designed to melt and create an open circuit if the current for which the fuse is rated is exceeded by a predetermined amount. By creating this opening in the circuit, the fuse as the "weakest link" protects the rest of the circuit or what is connected to it. While the speed, breaking capacity and reliability of fuses has improved over time, the basics have not. Circuit breakers are more sophisticated switched fuses that can be reset--unlike these original fuses which would need to be physically replaced when they were "blown".
Could Old transformers contain gold and or silver?
Old transformers just contain copper and iron or steel. Sorry.
What are the recommended steps for replacing Stab Lok replacement breakers in a circuit breaker panel?
To replace Stab Lok replacement breakers in a circuit breaker panel, follow these steps: Turn off the main power supply to the panel. Identify the Stab Lok breakers that need to be replaced. Carefully remove the old breakers by disconnecting the wires and pulling them out. Insert the new Stab Lok replacement breakers into the panel. Reconnect the wires to the new breakers, ensuring they are securely attached. Turn the main power supply back on and test the new breakers to ensure they are functioning properly. It is important to follow safety precautions and consult a professional if you are unsure about any step in the process.
Is it necessary to wire for an electric range and dryer if you are using gas to meet code?
I don't think you quite understand your question. If this is new construction, (or redesign), and you are installing a gas range, the gas line has to be installed to code. If you are abandoning already installed electrical wiring, you should either remove the wiring and the circuit breakers or securely seal the ends of the wires with wire nuts and tape and turn off the circuit breakers. It also helps to lable the wires and circuit breakers as "old - not in use".
What seven elements are metiones in the Old testament?
Copper, Gold, Iron, Lead, Silver, Sulfur, and Tin.
How much silver is in dimes new and old?
U.S. dimes dated 1964 and earlier contain 90% silver with 10% copper. Dimes dated 1965 and after contain absolutely no silver.
Are old silver dollars pure silver?
All circulating US silver coins were at least 10% copper. Pure silver is far too soft, so it has to be alloyed to stand up to circulation wear.
How old is silver mining?
Silver was one of the first metals after gold and copper to be molded by humans, and silver artifacts have been found in Near Eastern tombs dating back to 4,000 B.C.
