If you mean for drinking water then, NO WAY! you can't drink bleach. You can use old water for almost everything. There is no real need to put bleach in water.
When water and bleach come into contact, they do not form salt and water as the outcome. Instead, the bleach reacts with water to form hypochlorous acid and hydrochloric acid.
No. Water cannot "deactivate" bleach. Water simply dilutes the concentration of the bleach molecules, which slows the bleaching action. However, the action continues so long as the bleach remains in a liquid state. To "deactivate" or neutralize bleach, you must use a neutralizing solution, such as sodium thiosulfate. There is a commercial product called Bleach Stop that will do the job.
1 part water 2parts
If you want the water to be more than hot enough to activate the bleach, then boil the water first. Boiling bleach is not advised, because that would produce deadly chlorine gas.
When using bleach as a disinfectant in dishwater, the water should be at room temperature. Hot water can reduce the effectiveness of the bleach. Add the bleach after the detergent and let the dishes soak for at least five minutes before rinsing thoroughly.
Pouring water into bleach helps minimize splashing and aerosolization of the bleach. This reduces the risk of inhaling bleach fumes, which can be harmful. Adding bleach to water allows for better dilution and mixing of the chemicals.
When water and bleach come into contact, they do not form salt and water as the outcome. Instead, the bleach reacts with water to form hypochlorous acid and hydrochloric acid.
Salt and water bleach
The recommended ratio of bleach to water to effectively kill mold is 1 cup of bleach to 1 gallon of water.
No. Water cannot "deactivate" bleach. Water simply dilutes the concentration of the bleach molecules, which slows the bleaching action. However, the action continues so long as the bleach remains in a liquid state. To "deactivate" or neutralize bleach, you must use a neutralizing solution, such as sodium thiosulfate. There is a commercial product called Bleach Stop that will do the job.
Household bleach has about 6 % bleach and 94% is water.Tap water usually has approx. two parts bleach to every one million parts water, or ( .0002 % )bleach and 99.9998 % is water )
To effectively disinfect water using bleach, you should add 8 drops of bleach per gallon of water.
The proper ratio of bleach to water for effective disinfection is 1:10, meaning one part bleach to ten parts water.
The recommended bleach to water ratio for sanitizing and disinfecting is 1:10, meaning one part bleach to ten parts water.
The recommended ratio of bleach to water for effective disinfection is 1:10, meaning one part bleach to ten parts water.
To effectively disinfect well water with bleach, follow these steps: Determine the amount of bleach needed based on the volume of water in the well. Mix the appropriate amount of bleach with water in a separate container. Pour the bleach solution into the well, ensuring it is evenly distributed. Allow the bleach to sit in the well for at least 12-24 hours. Flush the well by running water until the bleach odor is no longer present. Test the water for chlorine levels to ensure it is safe for consumption.
No, bleach will work in any temperature water but it will work best in hot water with white clothes.