0
The terms are relative, like high power and low power for motors. It is relative to RPM. All centrifuge speeds are delineated in RPM. revolutions per minute. The type used in medical labs require specialized centrifuge test tubes (tapered and made of pyrex or some special centrifuge-specific glass). These normally run at a set speed but may have limited speed range control with a directional knob. There are really heavy duty centrifuges which are horizontal axis and look almost like UFOs and have a variety of chemical processing applications.
What else can I help you with?
What is the best speed to separate a soil sample in a centrifuge?
Very high speed is the best speed to separate a soil sample in a centrifuge.
Can carbon dioxide and oxygen be separated by physical means?
Yes, a high speed gas centrifuge can do it.
What are the parts of a centrifuge and their functions?
A centrifuge has holes to insert the centrifuge tubes in, a cap to secure the tubes inside, and a lid to protect both the samples and experimenter in case of malfunction. There is also typically a way to set the centrifuge speed and a power switch to turn the centrifuge on and off.
Does a 1996 753 Bobcat have a low and High speed?
The 1996 753 Bobcat skid steer loader typically has two-speed options - low and high. This feature allows for increased maneuverability and efficiency based on the task at hand.
The difference of centrifuge and test tube?
A tapered and specially-engineered test tube specifically for centrifuge work, designed to resist the high G-forces induced by the centrifugal forces. They are mainly used in medical work to centrifuge human blood for test purposes. despite all the potential hazards I have never heard of a centrifuge accident or explosion if used properly with all safety devices employed. there was a tale in a Gotham paper of a centrifuge (Open and uncovered) blowing up with an induced chemical reactionk, certtainly not SOP. a teacher or student had some mild splash burns.
What is the best speed to separate a soil sample in a centrifuge?
Very high speed is the best speed to separate a soil sample in a centrifuge.
What is the Process of seperating cell parts by spinning cells in a tube at high speed?
using the Centrifuge
Can carbon dioxide and oxygen be separated by physical means?
Yes, a high speed gas centrifuge can do it.
Why the homogenate was filtered before spining at low speed in the centrifuge?
To remove large pieces of tissue and complete cells.
What is clinical centrifuge?
Clinical centrifuge are devices used for clinical applications like blood collection tubes. These laboratory equipment are driven by motor and spins liquid samples at high speed.
What do you call a high speed rotating device that removes moisture from pulverized coal or other solids?
It is a vibratory centrifuge
How can I safely and effectively use a home centrifuge for my experiments?
To safely and effectively use a home centrifuge for experiments, follow these steps: Read the user manual thoroughly to understand the equipment and its limitations. Ensure the centrifuge is on a stable surface and properly balanced before use. Use appropriate tubes and ensure they are securely closed to prevent spills. Start the centrifuge at a low speed and gradually increase to the desired speed. Avoid overloading the centrifuge and always use proper safety gear, such as gloves and goggles. After use, clean the centrifuge and properly store it to maintain its functionality.
Centrifuge : inertia :: wheel:?
speed
What is the maximum current of the pole changing motor when running at low speed and high speed?
The maximum current of the pole changing motor when running at low speed and high speed depends on a few different things. The average when begin at low speed and using high speed is 1800 RPM points.
What are the parts of a centrifuge and their functions?
A centrifuge has holes to insert the centrifuge tubes in, a cap to secure the tubes inside, and a lid to protect both the samples and experimenter in case of malfunction. There is also typically a way to set the centrifuge speed and a power switch to turn the centrifuge on and off.
What is the working principle of a centrifuge?
A centrifuge uses centrifugal force to separate components of a mixture based on their density. When the centrifuge spins at a high speed, the denser components move outward and settle at the bottom, while the less dense components move towards the top. This separation allows for the isolation of different substances or particles in the mixture.
How would you describe the wavelength of a wave with low speed but high frequency?
The wavelength of a wave with low speed but high frequency would be short.
