0
What else can I help you with?
Name the transition metal in 3d series which shows maximum oxidation state?
Manganese
What happens when an atom of metal an atom of nonmetal are combined?
The metal loses its electrons and trannsfers them to the non-metal to form an ioinic bond.
If you have a motor that must remain adaptable to several sizes of belts what is the maximum length of flexible metal conduit you can use before the conduit requires fastening?
Adding an extra length of shaft on the existing shaft to take extra pulleys will put an extra load on the bearings supporting the shaft. In the long term this would shorten the life of the bearings. The makers might be able to supply more information like the side-load specification for the bearings. If in doubt support the outer end of the shaft.
What a safety device that melts if the current is too big?
It is a fuse, a piece of metal wire, usually in a glass tube, that can only just carry the maximum allowed current. A current greater than the maximum allowed will melt the wire.
Is the shaft the longest portion of a long bone?
No, the shaft is not the longest portion of a long bone. The shaft is the main middle part of the bone, also known as the diaphysis. The long bones have a shaft (diaphysis), and two ends (epiphyses) that may be longer in length compared to the shaft.
Determine the maximum torque the shaft can transmit?
The maximum torque a shaft can transmit depends on the material, diameter, and length of the shaft as well as the operating conditions such as speed and applied load. To determine the maximum torque, you would need to perform a detailed mechanical analysis or consult engineering specifications for the specific shaft in question.
What is shaft sleeve?
A shaft sleeve is a piece of metal tubing placed over the shaft to protect as it passes through the packing area.
Where in the us is shaft mining found?
Anywhere that the mineral or metal is not close to the surface, requiring that a shaft be dug to get to it.
What is the condition for maximum velocity?
The condition for maximum velocity is acceleration equals zero; dv/dt = a= o.
What is the metal used for making crank shaft?
Forged steel
Why is the shaft of screwdriver made from metal?
So it doesn't break.
What type of metal makes up the shaft of a golf club?
Metal golf shafts are made of steel.
What is maximum efficiency condition in distribution transformer?
The maximum efficiency condition in distribution transformer is said to be occurred when iron loss = copper loss
What is a thrusting weapon with a long wooden shaft and a sharp metal head?
iunno
What is the physical change of metal if in contact with dry ice?
The metal would tend to contract in size. One technique to remove a gear from a shaft is to cool the shaft while heating the gear. The shaft contracts a bit while the gear expands a bit which can make the gear easier to remove. Also, dry ice (CO2) would not oxidize metal as water ice (H2O) would.
How can you remove a stripped bolt from the crank shaft pulley?
Use an easy-out of harder metal after drilling a small hole with harder metal.
Is it always possible to operate maximum transfer condition?
no
