answersLogoWhite

0

form you question i found out that your circuit bearker panal has burn too ,,in case not to happne again you please have got to check the AMPS at both ,,the bulb and the hell circuit breaker ,,the buy the high of AMPS for ur circit breaker .

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Natural Sciences

What can we do if our Curcuit breaker tripped on the heater and will not reset?

If your circuit breaker has tripped and will not reset after a heater overload, it is essential to disconnect the heater from the circuit and try resetting the breaker again. If the breaker continues to trip, there may be a more significant issue with the heater or the circuit, and it is recommended to contact a licensed electrician to assess and repair the problem to prevent any potential hazards.


How do you find a triped circuit?

Check the circuit panel / breaker box. The tripped breaker should be partway between 'OFF' and 'ON'. If nothing else, turn the breakers off then on, one at a time and when the tripped breaker is reset, the circuit should be live again. Also check GFI outlets. If one is in fault condition, it will need to be reset. If the tripped GFI outlet is protecting other outlets, they will come back when the tripped GFI is reset. These sockets seem to hide in many cases... Behind microwave ovens for example or refrigerators.


What device can break an electric circuit?

There are 2 different types of these devices: circuit breakers (which can be reset after the problem is fixed) and fuses (which must be replaced after the problem is fixed).


What would cause loss of power to the wires in the ceiling for a light fixture if the breaker is not tripped?

Bad ground connection. Corrosion on wire. Broken or cracked wire. Bad Switch. Mouse chewed through wire. just a guess but it may be faulty wiring in the fixture itself you can try to figure it out first try to problem solve it.did you replace an older one?is it a new fixture?did it work before or after you replaced it?andis it a fairly old one?you can replace it as a last resort.


What is a tripped circuit breaker?

As far as a fuse like in a car or even larger versions of the fuses in a car you should be able to see inside the little wire; if the fuse has burnt amd is split in two parts the fuse has been broken. In a circuit breaker it works a little differently, instead of burning out and needing to be replaced, the breaker will "trip" this means there is too much current being drawn through the circuit and the setup cannot handle it. A breaker instead will click to the off position and the switch will flip from on to off. These are much easier to locate than a burnt fuse because in a breaker box usually all the switches are turned to on and in the same direction, so the one breaker that did trip will be pointed in the opposite direction. Simply flip the switch from off to on and its been reset. If the breaker keeps tripping then there is either a short or you have too many loads (appliances) running on that circuit, for instance a power strip with 6 things plugged into it all running at the same time.

Related Questions

Has the tripped circuit breaker affected the operation of your dryer?

Yes, the tripped circuit breaker has affected the operation of the dryer.


How can I troubleshoot a circuit breaker issue?

To troubleshoot a circuit breaker issue, first, check if the breaker is tripped by looking at its position. If it is tripped, try resetting it by switching it off and then on. If the breaker continues to trip, unplug all devices connected to that circuit and try resetting again. If the issue persists, it may be a sign of a faulty breaker that needs to be replaced by a professional electrician.


How the circuit breaker differ in its function from combination switch fuse unit?

The function is the same in that they both are designed to remove an over current situation by opening the circuit. A tripped breaker can just be reset. A blown fuse needs to be replaced.


In electronics what is meaning when a moulded case circuit breaker releases?

It is another way of stating that the circuit breaker has tripped due to an over current.


Why has my light fixture stopped working?

There could be several reasons why your light fixture has stopped working, such as a burnt-out bulb, a faulty switch, a tripped circuit breaker, or a problem with the wiring. It is recommended to check these potential issues to determine the cause of the problem and address it accordingly.


What could be the reason for a circuit breaker being red but not tripped?

A circuit breaker may be red but not tripped due to a fault in the wiring or a malfunction in the breaker itself. It is important to have a qualified electrician inspect and repair the issue to ensure safety and proper functioning of the electrical system.


What should I do if the light in my room is not working?

If the light in your room is not working, first check if the bulb needs to be replaced. If the bulb is not the issue, check the circuit breaker to see if it has tripped. If the circuit breaker is fine, there may be a problem with the wiring and you should contact a professional electrician for help.


Why did the main circuit breaker trip?

The main circuit breaker tripped because it detected an electrical overload or short circuit, causing it to automatically shut off to prevent damage or fire.


Why is the outlet not working even though the breaker has not tripped?

The outlet may not be working due to a faulty outlet, loose wiring, or a problem with the circuit. It is possible for the outlet to be malfunctioning even if the breaker has not tripped.


How to read a circuit breaker?

To read a circuit breaker, first locate the breaker panel in your home. Each breaker is labeled with a number or description indicating which area of the house it controls. To check if a breaker has tripped, look for one that is in the "off" position or not aligned with the others. To reset a tripped breaker, switch it to the "on" position. If the breaker continues to trip, it may indicate an electrical issue that requires professional attention.


Possible electrical problem will my microwave oven be okay?

Check the circuit breaker to see if it tripped.


What can we do if our Curcuit breaker tripped on the heater and will not reset?

If your circuit breaker has tripped and will not reset after a heater overload, it is essential to disconnect the heater from the circuit and try resetting the breaker again. If the breaker continues to trip, there may be a more significant issue with the heater or the circuit, and it is recommended to contact a licensed electrician to assess and repair the problem to prevent any potential hazards.