answersLogoWhite

0

by touching it to the wall of the waste beaker

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Natural Sciences

Can a pipet be placed in a reagent bottle?

Yes, a pipet can be placed in a reagent bottle to withdraw specific volumes of the reagent as needed. It is important to ensure that the pipet tip does not touch the sides or bottom of the bottle to prevent contamination and maintain accuracy in volume measurement.


What is a pipet pump and how is it used?

A pipette pump is a modern and more complicate pipette, having a little mechanical pump; the scope is to delivery small and precise volumes of liquids. See the link below or catalogs of chemical laboratory accessories.


How do you observe the cell arrangement in a growing root tip and how can you say that cutting of root tip blocks the root growthexplain with flow chart?

To observe cell arrangement in a growing root tip, you can prepare a slide of the root tip using a microscope. The root tip contains apical meristem cells that are actively dividing, resulting in a layered arrangement of cells. Cutting the root tip removes the meristematic tissue responsible for growth, halting root elongation. Flow Chart: Collect Root Tip Obtain a growing root tip from a plant. Prepare Slide Slice the root tip, stain, and mount on a slide. Observe Under Microscope Identify layers of actively dividing cells in the meristem. Cutting the Root Tip Remove the tip → Loss of meristematic cells → Inhibition of root growth.


How is the distillate collected in a test tube microscale distillation?

In a test tube microscale distillation setup, the distillate is collected by attaching a small test tube or vial to the condenser. As the vapor condenses, it drips down into the attached container. The test tube is placed in an ice bath to further condense the vapor and facilitate collection.


If you get stuck with a yucca leaf tip is it poison?

Yucca leaves are not usually toxic but can have sharp points that may cause irritation or injury if stuck under the skin. It's important to carefully remove the tip to prevent any infection or discomfort. If symptoms persist or worsen, seek medical help.

Related Questions

Can a pipet be placed in a reagent bottle?

Yes, a pipet can be placed in a reagent bottle to withdraw specific volumes of the reagent as needed. It is important to ensure that the pipet tip does not touch the sides or bottom of the bottle to prevent contamination and maintain accuracy in volume measurement.


How do you deliver 5.00 mL of liquid by using a transfer pipet?

To deliver 5.00 mL of liquid using a transfer pipet, you would draw up the liquid into the pipet slowly until the meniscus reaches the 5.00 mL mark on the pipet. Then, you would carefully transfer the liquid to the desired container by releasing it slowly while touching the pipet tip to the container's wall to ensure all the liquid is expelled. Remember to handle the pipet carefully to avoid spills or contamination.


Why is it important t o change the pipet tip after each sample has been placed into a well?

Changing the pipet tip after each sample prevents cross-contamination between samples, reducing the risk of false results. It ensures accuracy and reliability of the experiment by maintaining the integrity of each sample being dispensed.


How do you remove a Honda rincon exhaust tip?

There are 3 screws on the tip. Take them out and the tip will pull out.


Why was I suspended from The Initiates Program?

Members of The Initiates Program can be suspended due to any of these reasons:Inactivity on the websiteInactivity in the programNot completing TIP missions after several monthsHas completed TIP missions but has not reported the completion to TIP so they can move onA suspension is not a termination. You may return to the program at any time by asking a TIP Supervisor (Xnicola or Skullcandy88).However you will have to restart your TIP training from the very beginning, to reassess what you have learnt previously.


What is a pipet pump and how is it used?

A pipette pump is a modern and more complicate pipette, having a little mechanical pump; the scope is to delivery small and precise volumes of liquids. See the link below or catalogs of chemical laboratory accessories.


What are the differences between a pipet and a pipette, and how are they used in laboratory settings?

A pipet and a pipette are both tools used in laboratories for measuring and transferring liquids. The main difference between them is their design and usage. A pipet typically refers to a glass or plastic tube with a tapered tip used for transferring precise volumes of liquid. On the other hand, a pipette usually refers to a more sophisticated tool with a bulb or mechanism for drawing and dispensing liquid accurately. Both are essential for conducting experiments and ensuring accurate measurements in laboratory settings.


What are the difference between td and tc pipets?

The labels TC and TD mean "to contain" and "to dispense" respectively. What this means is that glassware can either be calibrated for the purpose of containing a solution or for the purpose of transferring and dispensing a solution. Most flasks will be labeled TC while most pipets and burets will be labeled TD.


How we can use acetocarmine to stain the onion root tip cells?

To stain onion root tip cells with acetocarmine, first immerse the root tip in acetocarmine solution for a few minutes to allow the stain to penetrate the cells. Then, rinse the root tip with water to remove excess stain while retaining the stained cells. Mount the root tip onto a slide with a drop of water and cover with a coverslip for observation under a microscope.


How do you beat level 5 cover orange?

You drop the first barrel on the tip of the wood, then you drop the second barrel near the orange then you drop the box on that to build a roof.


How do you use dropping Pipette?

An Epppendorf pipet is what is called a constant volume pipet. It consists of a barrel with a a push button on one end and a stem on the other. You attach a single use disposable tip to the stem. Some models allow you to set the volume to be dispensed, some are not adjustable. In use, , you depress the push button to the first stop, insert the tip into the liquid to be pipetted, and release the button smoothly to draw up the liquid. Then, transfer the pipet to the receiving vessel and depress the button past the first stop to the second stop, this dispenses the liquid and blows out the last drop to insure accuracy, then discard the tip before the next use. Every time you draw up liquid, you get the exact same volume, with very high precision.


What happens when a drop remains hanging from the tip of the burette after the solution has been added to the flask?

If a drop remains hanging from the tip of the burette after the solution has been added to the flask, it could lead to inaccuracies in the volume measurement since that drop has not been delivered into the flask. To ensure accurate measurements, it is important to wait until the drop completely detaches from the tip before stopping the titration.