0
What else can I help you with?
What is the minimum hardness value for IS 1570 Gr 20C8 material?
The minimum hardness value for IS 1570 Gr 20C8 material is typically around 197 HB.
If a person does 80 of work in moving a 30 box over a 20 distance on a horizontal surface what is the minimum force required?
80 jules/20meters= 40Newtons
The minimum temperature at which a material gives off enough vapor to form an ignitable mixture with air is called the materials?
The minimum temperature at which a material gives off enough vapor to form an ignitable mixture with air is called the material's flash point. It is an important safety measure in handling and storing flammable substances.
What is the proper unit to express the distance between the sun and mars?
The scientific notation for planets' distances is the astronomical unit (AU), which is the semimajor axis of the Earth's elliptical orbit, 149.6 million kilometres. This is the mean of the minimum and maximum distances of the Earth from the Sun. Mars's distance is on average 1.524 AU with an eccentricity of 9.33% which means that the distance varies over the range 1.524 x (1 ± 0.0933). Minimum and maximum distances occur when the planet is at either end of the major axis of the ellipse.
What do you call the minimum amount of material that is needed for the reaction to keep going?
The minimum amount of material needed for a reaction to continue is called the "threshold concentration" or "minimum effective concentration." This refers to the lowest concentration of a reactant required to sustain the reaction at a desired rate. In some contexts, it may also be referred to as the "stoichiometric amount" needed to maintain the reaction.
At what angle from a horizontal should a weapon be fired to achieve minimum distance traveled by the projectile?
The weapon should be fired at a 45-degree angle from the horizontal to achieve the minimum distance traveled by the projectile. This angle maximizes the range (horizontal distance) of the projectile by balancing the vertical and horizontal components of its velocity. At any other angle, the total distance traveled would be greater.
What is the minimum hardness value for IS 1570 Gr 20C8 material?
The minimum hardness value for IS 1570 Gr 20C8 material is typically around 197 HB.
What is the minimum length of material that can be planed using a DeWalt planer?
The minimum length of material that can be planed using a DeWalt planer is typically around 12 inches.
What kind of triangle has 3 horizontal sides?
A triangle will always be composed of a minimum of one horizontal and one verticle line with a third line connecting them together. Therefore, it would be impossible to compose a "legal triangle" with three horizontal lines.
What are the minimum clearance distances outside of a marked basketball court?
Architectural Graphic Standards 10th Edition: 10'-0" Minimum unobstructed clearance around court
Are there any regs or recommendations regarding a safe area around a machine. Distance from a wall or other machine?
Yes, there are regulations and recommendations regarding safe distances around machines, called minimum approach distances (MAD) or minimum safe distances. These distances can vary based on the type of machine, voltage, and potential hazards involved. It is important to refer to the specific machine's safety guidelines and relevant industry standards to determine the appropriate safe distance.
A grey kangaroo can leap a distance of 10 on horizontal ground.What is the minimum takeoff speed for such a leap?
the answer is 9.9 m/s
What is the MINIMUM lap of rabbeted horizontal lap siding?
17 (calculated via least squares)
What is the minimum distance allowed between two manholes in sewer?
Outside diameter (OD) of adjacent manholes (including the bottom slabs) should have minimum of five (5) feet horizontal clearance.
What is the federal government ability to set a minimum wage is?
An implied power
What is the minimum pitch requirement on a roof?
the pitch of a 7-12 roof slope meaning that for 12" of horizontal measurement (roof run) the vertical measurement (roof rise) is 7". Not totally sure but I believe the minimum to be about a 3-7 inch pitch 3 inch roof rise per 7 feet of horizontal measurement
Why are roads super elevated around horizontal curves and what factors control the maximum and minimum values of super elevation to be applied?
[object Object]
