0
Could be a lot of metals depending on how old it is. A coil of fuse wire hasn't been used in North America for over 50 years.
What else can I help you with?
What safety switching device made by a fine wires which easily breaks?
A fuse is a safety switching device made of a fine wire that easily breaks when an excess current flows through it. When the wire breaks, it interrupts the circuit, protecting the electrical system from damage caused by overloads or short circuits.
What Commonly used fuse wire is need of?
Commonly used fuse wire is needed for electrical safety, as it acts as a protective device that prevents excessive current from flowing through electrical circuits. When the current exceeds a certain threshold, the fuse wire melts, breaking the circuit and preventing potential damage to appliances or electrical fires. It is typically made of materials with a low melting point, such as tin or lead alloy, ensuring quick response to faults. Proper selection of fuse wire is crucial to match the electrical load and protect the system effectively.
Why wires are made of cooper?
Electrical wires are made from copper, as copper is a good conductor of electricity.
Can iron be in a wire?
Yes, iron could be made into a wire. However, because of its susceptibility to oxidation and lower conductivity than copper, this metal is not commonly used for electrical wires.
What is a wire made of many strands?
A wire made of many strands is typically known as a stranded wire. This type of wire is composed of multiple smaller wires twisted or braided together, providing flexibility and resistance to fatigue from bending. Stranded wires are commonly used in applications where flexibility or vibration resistance is required.
Why are electric wires don-not made of rubber?
Obviously, rubbers are not conductors. Wires are commonly made of copper.
What safety switching device made by a fine wires which easily breaks?
A fuse is a safety switching device made of a fine wire that easily breaks when an excess current flows through it. When the wire breaks, it interrupts the circuit, protecting the electrical system from damage caused by overloads or short circuits.
What is the percentage of copper in fuse wires?
The percentage of copper in a fuse wire is very small or non existent. Fuse wire is made from mixing different types of alloys together of aluminum, nickel, iron and chromium. The alloys result in compounds called cronifer and aluchrom. The composition of the different fuse wires results in how the characteristics of the fuse fault current is handled.
Are made of glass and have strips of metal inside that will melt a a safety device?
It is called a fuse
What is the function of fuse?
In electrical engineering, a safety device that protects electric circuits from the effects of excessive electric currents. A fuse commonly consists of a current-conducting strip or wire of easily fusible metal; whenever the circuit is made to carry a current larger than that for which it is intended, the strip melts to interrupt it.
What are twisted pair cable wires made of?
if by "twisted pair cable" you mean a cat5 cable which is commonly used as an ethernet cable. then it´s made of copper.
What Commonly used fuse wire is need of?
Commonly used fuse wire is needed for electrical safety, as it acts as a protective device that prevents excessive current from flowing through electrical circuits. When the current exceeds a certain threshold, the fuse wire melts, breaking the circuit and preventing potential damage to appliances or electrical fires. It is typically made of materials with a low melting point, such as tin or lead alloy, ensuring quick response to faults. Proper selection of fuse wire is crucial to match the electrical load and protect the system effectively.
If a freeway mini bike's wires to the fuse came loose and you tried to solder the wires back on but cracked the fuse holer and so you solderd them strait to the fuse Is this Okay?
AnswerNO. What will you do when the fuse burns out?That fuse holder was designed into the system for a good reason, to make it simple to replace a burned out fuse. Now you have made it much harder to do a simple repair job.Answeryes because even if the fuse burns out again alls u gotta do is desolder it then sodder a new fuse in. also i would add more wire because that old wire mite not survive a lot of soldering and desoldering and bending
What are the two types of wires and which is the most commonly uses in automobile?
Two basic types of wire are used: solid and stranded .Solid wires are single strand conductors.Stranded wires are the most common and are made up of a number of small solid wires twisted together to form a single conductor.
What are the two types of wires and which is the most commonly used in automobiles?
Two basic types of wire are used: solid and stranded .Solid wires are single strand conductors.Stranded wires are the most common and are made up of a number of small solid wires twisted together to form a single conductor.
What kind of material are wires made of?
plastic is the answer .
What wires in a ciruit are made of material that is a doortuccn?
Copper wires are commonly used in circuits as they are a good conductor of electricity. Copper is a ductile material that allows easy shaping into wires and has low resistance, making it ideal for carrying electrical current efficiently in a circuit.
