As many as you like, watts and MHz have no equivalence because watts measure power while MHz measure frequency.
The wavelength of ultrasound can be calculated using the formula: wavelength = speed of sound / frequency. Assuming the speed of sound in human tissue is about 1540 m/s, the wavelength of 3.5 MHz ultrasound would be approximately 0.44 mm.
theoretically there can be nine 1.25 MHz CDMA carries per cell.
There is no direct conversion between frequency (MHz) and power (watts). Watts measure power, while MHz measures frequency. The power output at a frequency of 50 MHz would depend on the specific device or system generating the signal.
20 MHz
The wavelength of a 3 MHz ultrasound pulse in soft tissue would be approximately 0.5 mm. Wavelength is given by the equation λ = c/f, where c is the speed of sound in tissue (~1500 m/s) and f is the frequency in Hz. This short wavelength allows for detailed imaging in soft tissue.
Frequency = speed/wavelength = 300,000,000/2 = 150,000,000 = 150 MHz. (The ham-radio band from 144 to 148 MHz is usually called the "two-meter band".)
Wavelength = speed/frequency = 3 x 108/100 x 106 = 3 meters (in vacuum)
he rating for RIMM memory is based on the maximum theoretical bandwidth (in MHz) and included speed ratings of 800 MHz, 1066 MHz, 1200 MHz, 1333 MHz, and 1600 MHz.
MHz. 1000 MHz = 1 GHz.
600 MHz or 800 MHz
Frequency Coverage: VHF-Lo: ................................ 29 MHz -50 MHz (in 5kHz steps) Ham: ................................... 50 MHz -54 MHz (in 5kHz steps) Government: .......................... 136 MHz -144 MHz (in 5kHz steps) Ham: ................................. 144 MHz -148 MHz (in 5kHz steps) VHF-Hi: .............................. 148 MHz -174 MHz (in 5kHz steps) Ham/Government: .................. 460 MHz - 450 MHz (in 12.5kHz steps) UHF-Lo: .......................... 450 MHz - 470 MHz (in 12.5kHz steps) UHF-Hi: .......................... 470 MHz - 512 MHz (in 12.5kHz steps) Channels of Operation.............Any 16 channels in any band combination
Uplink --> 890 MHz - 915 MHz Downlink --> 935 MHz - 960 MHz
250 mhz fo sure...
100 MHz
1 MBPs how many MHZ
Yes, as 800 MHz is faster than 2GHz, the soft ware will run fine. 1000MHz=1GHz. Any program that requires a certain CPU speed will always run on one of a higher speed