0
What else can I help you with?
How many lumens in a 125 watt CFL?
Depending on the brand, it will give about 18.000 Lumens and equals a 100W HPS lamp
How many amps in a 40 watt light bulb?
A lumen is the perceived intensity of the light, as seen by the human eye. The lumen value is largely determined by the the nature of the light, i.e. the sum of the different wavelengths of the light being transmitted by the particular bulb type.The standard tungsten wire-filament ('incandescent') bulb radiates a different type of light to a flourescentlight.* a 230 V, 40 watt incandescent bulb produces a light (quality) of about 400-500 lumens,* a standard 230 V flourescent lamp of only 7 watts will produce exactly the same value of lumens, i.e. 400-500 lumens. * the cool white XLamp XP-G 3.5 V LED lamp of only 3 watts will produce a similar value of lumens, i.e. 350 lumens. And is safer for the workers that make them and better for the environment. It is currently more expensive, but prices have been dropping about 20% per year. Therefore LED light bulbs convert electricity into light more efficiently than incandescent or florescent light bulbs. * For more information, See Related links below this box
How many lumens for an led replacement vs stock 1141 bulb?
A lumen is a measure of how much total light a bulb produces. Incandescent (1156) bulbs spray their light through almost 360 degrees and lamp housings designed for them rely on that. Most LED lamps put all their light out in a narrow cone and work poorly with standard 1156 housings. However, there are LED assemblies that have their light-producing chips arranged around a sphere and they work well in standard housings. The LEDs you see on commercial vehicles are mounted in housings designed for their narrow cone output, that's why they look bright. A standard 1156 bulb puts out about 400 lumens when new. As of January 2010, I haven't found an LED replacement that puts out any more, and most are only 50 lumens or so, not enough for a standard 1156 housing. To confirm the above: From Bosch Automotive Handbook7th ed. a 1156 (BA15S) Stop/Turn 21W bulb puts out 460 lumens. For a 5W Side marker / Tail BA15S it is 50 lumens (strangely low, I know) and 10W Tail light 125 lumens. If replacing with a warm white LED, then that is how many lumens you need to match the brightness (as well as light direction being good). BUT, if using a Red LED for a brake light or an Amber LED for Turn signals, then less lumens are needed. This is because the Red lens of a brake light filters out all the blue, yellow, green, etc out of white light, but filters nothing from a Red LED. The question now is: What is the percentage of "Red" in the light output of a "White" incandescent bulb?
How much wattage does a 250w HPS bulb use?
A 250W HPS (High-Pressure Sodium) bulb uses 250 Watts of electricity when it is operating at its full power. It is important to note that the actual power consumption may vary slightly due to factors such as ballast efficiency and voltage fluctuations.
How many fluid ounces equal 125 ml?
125 mL is about 4.226 US fluid ounces.
How many lumens in a 125 watt CFL?
Depending on the brand, it will give about 18.000 Lumens and equals a 100W HPS lamp
How many lumen's are in a 36 watt T8 fluorescent tube?
2300lm Comment I think you mean lumens, not lumen's. No that answer is wrong Watts (energy usage) / Lumens (light output) 25 is equal to 200 35 is equal to 325 40 is equal to 450 60 is equal to 800 75 is equal to 1100 100 is equal to 1600 125 is equal to 2000 150 is equal to 2600 36 watts would be about 350 Lumens
How many amps in a 40 watt light bulb?
A lumen is the perceived intensity of the light, as seen by the human eye. The lumen value is largely determined by the the nature of the light, i.e. the sum of the different wavelengths of the light being transmitted by the particular bulb type.The standard tungsten wire-filament ('incandescent') bulb radiates a different type of light to a flourescentlight.* a 230 V, 40 watt incandescent bulb produces a light (quality) of about 400-500 lumens,* a standard 230 V flourescent lamp of only 7 watts will produce exactly the same value of lumens, i.e. 400-500 lumens. * the cool white XLamp XP-G 3.5 V LED lamp of only 3 watts will produce a similar value of lumens, i.e. 350 lumens. And is safer for the workers that make them and better for the environment. It is currently more expensive, but prices have been dropping about 20% per year. Therefore LED light bulbs convert electricity into light more efficiently than incandescent or florescent light bulbs. * For more information, See Related links below this box
How many lumens for an led replacement vs stock 1141 bulb?
A lumen is a measure of how much total light a bulb produces. Incandescent (1156) bulbs spray their light through almost 360 degrees and lamp housings designed for them rely on that. Most LED lamps put all their light out in a narrow cone and work poorly with standard 1156 housings. However, there are LED assemblies that have their light-producing chips arranged around a sphere and they work well in standard housings. The LEDs you see on commercial vehicles are mounted in housings designed for their narrow cone output, that's why they look bright. A standard 1156 bulb puts out about 400 lumens when new. As of January 2010, I haven't found an LED replacement that puts out any more, and most are only 50 lumens or so, not enough for a standard 1156 housing. To confirm the above: From Bosch Automotive Handbook7th ed. a 1156 (BA15S) Stop/Turn 21W bulb puts out 460 lumens. For a 5W Side marker / Tail BA15S it is 50 lumens (strangely low, I know) and 10W Tail light 125 lumens. If replacing with a warm white LED, then that is how many lumens you need to match the brightness (as well as light direction being good). BUT, if using a Red LED for a brake light or an Amber LED for Turn signals, then less lumens are needed. This is because the Red lens of a brake light filters out all the blue, yellow, green, etc out of white light, but filters nothing from a Red LED. The question now is: What is the percentage of "Red" in the light output of a "White" incandescent bulb?
How much wattage does a 250w HPS bulb use?
A 250W HPS (High-Pressure Sodium) bulb uses 250 Watts of electricity when it is operating at its full power. It is important to note that the actual power consumption may vary slightly due to factors such as ballast efficiency and voltage fluctuations.
How hot does a 60w light bulb get?
A 60-watt incandescent light bulb can reach temperatures of around 257 degrees Fahrenheit (125 degrees Celsius) during operation. LED and CFL bulbs, which are more energy-efficient, produce less heat and operate at lower temperatures.
What three numbers equal 125?
125 is equal to 125.No other number is equal to 125.
125 pounds are equal to how many kgs?
125 pounds are equal to about 56.7 (56.699) kg
What is the fraction equal to 125?
125/1
125 grams is equal to?
125 grams is equal to 0.125 kilograms or 125,000 milligrams.
What 2 numbers equal 125?
25 and 5 but there are more ways that equal to 125
What does five to the Third power equal to?
5^3 is equal to 125.
