A good temperature for a chiller on the water side is typically between 45-55 degrees Fahrenheit. This helps ensure optimal cooling efficiency without risking freezing the water or causing damage to the chiller components. Regular monitoring and adjustments may be needed to maintain this temperature range.
212ferenheight
40 degress
Water freezes at 32 degrees Fahrenheit.
The water being held in the water tank when the furnace shuts off is at a set temp, the water tank hopefully is insulated, as time passes, the water temp has to drop because the furnace has not come on to maintain the set temp, also the controller could be faultly that controls the water temp for the hot water heater, the only time you have hot water is when the furnace runs.
No it does not due to its temp and the materials like gas and water.
Depending the type of glass chiller there may be a temperature nob or a setting located inside the chiller or on the bottom to turn down the temp.
depends on the model of it. a refrigerator needs to keep food at 42 degrees or lower to keep the food same, if your drink chiller can maintain that temp then yes, if not, no
hot cooked food are kept in chiller to reduce hot tempt.. to a correct temp
Fish are cold blooded, but need to be adjusted to the temp of the water. Slowly if its hot water being adjusted them you need to slowly rise the temp of the water to the temp of the water out side and the opposite for lowering the temp by the way this is all wrong so please don't read that.
Room temp.
Anything over 190 would be running it on the hot side.
On the side of the water pump housing
on the driver side head just above exhaust manifold
it screws into the side of one of the heads.
For land temp, wet your finger then hold it up in the air. For water temp, Dip your toe in the water>
In the driver side head between the first 2 spark plugs.
water temp is 4C