The length of a 1500 watt baseboard heater can vary depending on the model and manufacturer. Typically, a 1500 watt baseboard heater can range from around 48 to 72 inches in length. It's best to check the specifications provided by the manufacturer for the specific heater you are interested in.
The wattage of a Welbilt oil-filled space heater can vary depending on the model. It is recommended to check the product manual or the label on the heater itself to determine the specific wattage for your particular model.
To find the amperage of a 750-watt heater operating at 120 volts, you can use the formula: Amps = Watts / Volts. Therefore, 750 watts divided by 120 volts equals 6.25 amps. So, a 750-watt heater uses approximately 6.25 amps.
A 2000 watt heater draws 8.3 amps on a 240 v supply, so the cutout should be set to 10 or 12 amps. <<>> In North America a 2000 watt baseboard heater will be fed with a two pole 15 amp breaker. A two wire cable of #14 copper will be used to connect the supply voltage to the heater.
No, not all 1500 watt heaters are equal in BTU. The BTU output of a heater is dependent on factors like the efficiency of the heating element and design of the heater. While a 1500 watt heater will generate around 5118 BTUs, variations in design can lead to differences in heating performance.
A waterbed heater is used to warm up the waterbed. In a way, a waterbed heater is like a warm mattress pad for a regular bed. A warm waterbed will allow the bed owner to crawl into bed and be comfortable immediately.
To find instructions for installing a waterbed heater you can go to your local furniture stores or mattress stores and ask for assistance. You may also go online to sites like Home Guide for help.
No problems; don't worry. If it's comfortable, it's fine.
A 1000 watt generator cannot run a 1500 watt ceramic heater without having problems.
It is generally better to place the waterbed heater under the liner. This allows for more even heat distribution and reduces the risk of overheating the water, which can damage the mattress. Additionally, placing the heater underneath helps protect it from damage and keeps it out of direct contact with the water.
This website: http://www.waterbed.com/ sells waterbed heaters and you don't even have to leave your house to order one. They also offer free shipping.
A 50 watt heater is major over kill for a 3 gallon tank, a 10 watt heater is more than enough for a tank that size. You will nuke your aquarium very quickly the first time the 50 watt heater sticks on, with a 10 watt heater if it sticks on the aquarium temp will only raise a degree or two.
The recommended voltage for a 4500 watt water heater element is typically 240 volts.
The length of a 1500 watt baseboard heater can vary depending on the model and manufacturer. Typically, a 1500 watt baseboard heater can range from around 48 to 72 inches in length. It's best to check the specifications provided by the manufacturer for the specific heater you are interested in.
2000
Yes you can.
I would not try to heat a tank any larger than 8 gallons with a small 50 watt heater. The difference in price between a 50 watt and a much more usful 150 watt heater is not much. I'd check things out before I got a very small heater that may have to work very hard to do its job.