If you are going to eat it I recommend the T6. Otherwise not enough information.
A similar question would be.
What is better, Grape jam or axle grease?
T6 tells us that how the aluminium was treated.
Pure aluminum is generally too soft and insufficiently strong and rigid for structures. It is a good electrical and thermal conductor, however. How is your structure to be built? Alloy 6061-T6 is a good general purpose alloy, available as bars, plate, and other forms. It is weldable and generally reasonably priced. Alloy 6063-T6 is more common in extruded forms, shares all the advantages of 6061 except it is slightly less strong. If you are cold forming sheet metal, 5052-H32 is a good bet. It is also weldable, but is not preferable for machining (it is actually a little soft for good machining). Alloy 2024 is available in product forms like 6061-T6. It is stronger, but cannot be welded. ASTM A356 is a cast alloy roughly equivalent to 6061. There are many, many others. Some of the 7xxx alloys are very strong, but I'm not so familiar with them (especially in regards to corrosion), and they are higher cost. With any aluminum alloy and salt water present, you need to make sure there are no copper alloys in contact. Brasses and bronzes are common in marine use, and will corrode a hole into aluminum in short order when submerged in seawater.
No, 6061 T6 aluminum is not annealed. It undergoes artificial aging after solution heat treatment to achieve its T6 temper, which results in improved strength and hardness compared to the annealed condition.
Aluminium 6061 is a commonly used alloy that offers good strength, weldability, and corrosion resistance. It is known for its high tensile strength and excellent machinability. Additionally, it has good workability and is often used in structural applications due to its high strength-to-weight ratio.
No, 6061 m is equal to 6.061 km which is 10 metres longer than 6.051.
T6 6061 aluminum is an alloy primarily composed of aluminum, magnesium, and silicon, known for its good strength and weldability. T6 6082 aluminum is also an alloy with aluminum, magnesium, and silicon, but it has higher tensile strength and better corrosion resistance compared to 6061.
Aluminum alloy AA 6061 does not react with deionized (DI) water (DM water) at room temperature. However, prolonged exposure to water containing oxygen and other dissolved ions may result in localized corrosion, especially in the presence of chloride ions. Regular cleaning and maintenance are recommended to prevent corrosion in aluminum alloys.
6061 T6 is a specific temper designation for aluminum alloy 6061, indicating that it has been solution heat-treated and artificially aged to achieve a certain level of strength. On the other hand, AMS4027 is a specification set by the Society of Automotive Engineers (SAE) that outlines the requirements for aluminum alloy 6061 in the form of sheet and plate. In summary, 6061 T6 refers to the specific treatment of the alloy, while AMS4027 refers to the industry standard specification for the material in a particular form.
7075 is stronger than 6061 aluminum.
Most of the parts on the Shuttles are made of high tensile strength aluminum alloy composites (e.g., 6061-T6) or Titanium alloy.
The density of Aluminum 6061-T6 is approximately 2.7 g/cm³.
T6 tells us that how the aluminium was treated.
please explain
One cubic inch of 6061 aluminum weighs 0.0975 lb
Aluminum 6061 T6 has an exact SG of 2.707
"6061" is a type of aluminum alloy that is easily weldable and common in bicycle frames. The word "monocoque" means "single shell" in French. It describes a structure that relies on the outer shell to provide support, instead of an internal frame covered by a superficial outer covering.
6061 series