Asscher is a cut of diamond favored if the colour and clarity are superior and the raw diamond is fairly large. Cutting and polishing a diamond loses about 60% of its carat weight. Although any size raw diamond can be cut this way.
From the Diamond Pro web site, this is a description of the Asscher cut:
"Depth is 60% to 68% -- under 65% is relatively hard to find; table is 60% to 68%, polish/ symmetry is good, very good or excellent, and the length/ width ratio is 1.00 to 1.05 according to the GIA acceptable range for defining a diamond as a square [cut]."
No. Diamonds cut glass because diamonds are harder than glass. Quartz is not as hard as diamond.
The choice between round cut and emerald cut diamonds depends on personal preference. Round cut diamonds are known for their brilliance and sparkle, while emerald cut diamonds are valued for their elegant and timeless appearance. Ultimately, it comes down to which shape and style you prefer.
No, water cannot cut diamonds. Diamonds are one of the hardest natural substances, ranking a 10 on the Mohs scale of mineral hardness. Water, even at high pressure, does not have the hardness or abrasiveness to cut through a diamond.
No, emeralds are not hard enough to cut glass. Diamonds cut glass and they are the only gemstone with this capability.
Diamonds are available in a variety of cuts that exemplify their brilliance and clarity.Baguette-cut diamonds bring straight lines and beautiful shapes to all types of diamond jewelry. The baguette cut diamonds are rectangular and have step cuts similar to that of the emerald cut. This cut generally will have 24 facets and the parallel facets are arranged to look like a terrace.
Asscher cut diamonds may be purchased from Blue Nile. They offer all types of diamonds jewelry including engagement rings, pendants and earrings just to name a few. They also offer lower prices than other retailers when purchasing online.
The Asscher cut is a specific cut of diamond that was created in 1902 by the Holland based Asscher brothers. The shape is a stepped square cut and it is sometimes also called a square emerald cut.
You may be thinking of a cut of diamond gemstone. Square cuts include Asscher, Cushion, and Princess. Emerald cut is more rectangular in its appearance.
The Asscher cut may vary in the number of facets, depending on the weight of the stone, who cut the stone and who is selling it. This cut is essentially a square emerald cut. You can read more about it, below.
Physically, there is no limit -- no maximum size. Practically, however, your source material can present limitations. Any raw diamond can be cut in the Asscher cut. This squarish-looking cut intends to highlight flawless stones, so the raw diamond you intend to cut in this style must be internally flawless (if you want the highest value). As well, a D-F colour grade is required, since any hit of G or more yellow colour (in a colourless stone) will appear in the corners of an Asscher cut. These limitations mean that very few raw diamonds will appear in the larger weights to be cut in this style. Finally about 60% of a raw diamond's weight is lost during the cutting and polishing process.
Both Asscher cut and Princess cut diamonds have at least one measurement that is 5mm, and both with this perimeter weigh in the one carat range. ('Square' diamond is a description for a rather generic cut.) A certified gemologist can give you an exact weight for your diamond.
Ritani has a very large selection of Asscher cut engagement rings. They will allow you to create your ring online, and then go into the store and see the ring before you buy it.
Royal Asscher is one of the most famous diamond merchants in the world. They have cut some of the most famous pieces. They are based in Amsterdam and were founded in 1854.
The carat weight of a diamond is determined by its size, shape, and density. A 10 mm Asscher cut diamond typically weighs around 5-6 carats, depending on its specific proportions and the characteristics of the stone. Asscher cuts are known for their square shape and step-cut facets, which can affect how the carat weight translates visually. Always consult with a gemologist for precise measurements.
The company was founded in 1854 by Joseph Asscher. Today the Royal Asscher Diamond Company is still owned by the Asscher family. The current president is Edward Asscher.
on the assumption that you are asking about diamonds that have been cut... 1. The round cut is the most popular diamond shape, it maximizes potential brightness. 2. The Princess cut is a popular fancy shape for engagement rings 3 Oval diamonds have the advantage of an elongated shape whoch can create an illusion of greater size. 4. Marquise diamond is football shaped and has one of the largest surface areas 5 .Pear shaped diamonds, a combination of round and marquise shapes with a tapered point at one end 6 .Cushion ground diamonds combines a square cut with rounded corners 7. Emerald cut diamonds produce a 'hall of mirrors effect' 8. Asscher cut is similar to Emerald cut but in a square shape with larger facets, the effect is more brilliant than the emerald cut. 9. Heart shaped diamonds, popular in solitaire pendants and rings, the symbol of love
Abraham Asscher was born in 1880.