0
What else can I help you with?
Why you need boiler preservation?
Boiler preservation is necessary to prevent corrosion and rust formation when the boiler is not in operation for an extended period. It helps protect the internal surfaces of the boiler from damage and ensures that it can be safely and efficiently restarted when needed. Proper preservation also helps extend the lifespan of the boiler.
What is importance of checking conductivity in boiler water analysis?
Checking conductivity in boiler water analysis is important because it provides information on the total dissolved solids present in the water. High conductivity levels can indicate the presence of impurities or contaminants that can lead to scale formation on boiler surfaces, reducing efficiency and potentially causing equipment damage. Regular monitoring of conductivity helps ensure water quality is maintained within safe operational limits, promoting optimal boiler performance and longevity.
If oil is mixed with boiler feed water?
If oil is mixed with boiler feed water, it can cause scaling and fouling in the boiler system, leading to reduced efficiency and potentially damaging the boiler components. It is important to prevent oil contamination of boiler feed water through proper filtration and maintenance of equipment to ensure the smooth operation of the boiler system.
How many amps for a house boiler?
The amp requirement for a house boiler can vary depending on the size and type of the boiler. Typically, a house boiler may require anywhere from 15 to 30 amps to operate efficiently. It is important to consult the boiler's specifications and an electrician to determine the precise amp requirement for your specific setup.
What is an average price for a new natural gas boiler?
The price of a natural gas boiler will depend on a few factors. For example, the company that is selling the boiler, the quality of the boiler and where one is located. Prices may vary depending on location and availability.
What Amine do in boiler water?
Amines are used in boiler water primarily as oxygen scavengers to prevent corrosion in the boiler system. They react with dissolved oxygen to form harmless byproducts, thereby reducing the risk of pitting and other types of corrosion in boiler components. Additionally, some amines can help maintain pH levels and improve overall water quality, enhancing the efficiency and longevity of the boiler.
Why you need boiler preservation?
Boiler preservation is necessary to prevent corrosion and rust formation when the boiler is not in operation for an extended period. It helps protect the internal surfaces of the boiler from damage and ensures that it can be safely and efficiently restarted when needed. Proper preservation also helps extend the lifespan of the boiler.
What is the cycle of the boiler?
Cycles are a measure of the dissolved solids in the boiler water in relation to the dissolved solids in the feedwater. For instance, if the measure of chlorides in the feedwater sample is 5 ppm and the chlorides in the boiler water sample is 50 ppm then the boiler water has been cycled ten times, 50/5 =10. That means that all of the water in the boiler (plus all the water that has been blown down) has been evaporated completely ten times, and replaced by the same amount of feedwater. Steam does not carry the dissolved solids out of the boiler, they remain behind, these are controlled with water treatment and a continuous blowdown (bottom blowoffs control or remove suspended solids).
What is the meaning of cycles in boiler?
Cycles are a measure of the dissolved solids in the boiler water in relation to the dissolved solids in the feedwater. For instance, if the measure of chlorides in the feedwater sample is 5 ppm and the chlorides in the boiler water sample is 50 ppm then the boiler water has been cycled ten times, 50/5 =10. That means that all of the water in the boiler (plus all the water that has been blown down) has been evaporated completely ten times, and replaced by the same amount of feedwater. Steam does not carry the dissolved solids out of the boiler, they remain behind, these are controlled with water treatment and a continuous blowdown (bottom blowoffs control or remove suspended solids).
What is a function of deaerator?
deaerator is a device used to remove dissolved oxygen and carbondi oxide in boiler feed water. it causes scaling inside the boiler tubes and economizer also.
Will boiling water remove oxygen from boiler water?
Boiling water will not remove oxygen from boiler water; it will actually deaerate the water, reducing the dissolved oxygen content. Oxygen removal from boiler water typically relies on mechanical deaeration processes or chemical treatments.
What are the common oxygen scavengers used for boiler water?
There is a chemical called Carbohydrazide which is used in boiler water. Carbohydrazide is a volatile oxygen scavenger, contributes no solids to the system, reacts readily with oxygen at low temperatures and pressures, and passivates the metal of the boiler system. Carbohydrazide cannot be used in applications where the steam comes into contact with food.
What is the cause of a boiler scale?
Boiler scale is primarily caused by the deposition of minerals, such as calcium carbonate, magnesium silicate, and iron oxides, that precipitate out of water as it is heated. When hard water is heated in a boiler, dissolved minerals can crystallize and accumulate on the boiler's internal surfaces. This accumulation can lead to reduced efficiency, overheating, and potential damage to the boiler system. Regular maintenance and the use of water treatment methods can help mitigate scale formation.
Why morpholine dosing better than ammonia dosing in boiler feed water?
Morpholine is often preferred over ammonia for dosing in boiler feed water because it has lower volatility, lower potential for corrosion, and it offers better pH stability. Additionally, morpholine provides effective protection against both acidic and alkaline corrosion in the boiler system, making it a more versatile and reliable option compared to ammonia dosing.
What is Function of boiler dearating feed tank?
A boiler de-aerating feed tank serves to remove dissolved gases, primarily oxygen and carbon dioxide, from the boiler feedwater before it enters the boiler. This process helps prevent corrosion in the boiler system, which can significantly extend equipment life and improve efficiency. The tank also ensures that the feedwater is properly heated and stored, maintaining optimal conditions for steam generation. Additionally, it acts as a surge tank, providing a buffer for fluctuations in water demand.
What is an alternative to a gas boiler when a person is looking at furnaces?
Electric heating boilers can be a useful alternative to gas and other conventional furnaces. LPG and oil-fired boilers are also very efficient. Biomass boilers are also becoming popular.
Why is it important to maintain a gas-free condition in the boiler feed water?
Maintaining a gas-free condition in boiler feed water is crucial to prevent corrosion and scaling within the boiler system, which can lead to decreased efficiency and increased maintenance costs. Dissolved gases, especially oxygen and carbon dioxide, can cause pitting and other forms of corrosion in metal components. Additionally, gas bubbles can impair heat transfer, reducing the overall performance of the boiler. Ensuring the feed water is free of gases helps extend the lifespan of the boiler and improve operational reliability.
