basically
No, copper will not turn red litmus paper to blue. Red litmus paper changes to blue in the presence of a basic (alkaline) substance, while copper is a metal and does not exhibit basic properties. Therefore, it does not affect the color of litmus paper.
The best way to separate shredded paper and copper pieces is to use a combination of mechanical and manual methods. First, employ a vibrating screen or a sieve to allow the smaller paper fibers to fall through while retaining the larger copper pieces. After that, manual sorting can be used to collect any remaining copper pieces that may still be mixed with the paper. Additionally, an air classifier can help separate the lighter paper from the heavier copper through airflow.
yes copper sheeting is flexible because its turned into a paper like substance
Of aluminium, silver, paper or copper, only (very dry) paper is an insulator - the thicker the better.
You can separate unreacted copper II carbonate from aqueous copper II chloride by filtration. The copper II carbonate is insoluble in water, so it can be filtered out using a filter paper. The aqueous copper II chloride solution can then be collected separately.
No
Maharashtra is the leading state in India in producing paper. It has the highest number of paper mills and accounts for a significant portion of the country's paper production.
paper
Main articles paper machine handmade paper
No, copper will not turn red litmus paper to blue. Red litmus paper changes to blue in the presence of a basic (alkaline) substance, while copper is a metal and does not exhibit basic properties. Therefore, it does not affect the color of litmus paper.
Most paper clips are made from steel. You could make a paper clip out of copper, but the cost would be higher for something that would do the same job.
When your paper clip is made of (or coated with) more reactive metals than copper, like Fe, Zn or Sn, it might react with Cu2+ ions in your solution. Cu2+ + Fe(s) --> Cu(s) + Fe2+
Main articles paper machine handmade paper
To separate a mixture of copper sulfate and sand, you can use the method of filtration. First, dissolve the copper sulfate in water to form a solution. Then, pour the solution through a filter paper to separate the sand from the copper sulfate solution. The sand will be left behind on the filter paper while the copper sulfate solution passes through.
The best way to separate shredded paper and copper pieces is to use a combination of mechanical and manual methods. First, employ a vibrating screen or a sieve to allow the smaller paper fibers to fall through while retaining the larger copper pieces. After that, manual sorting can be used to collect any remaining copper pieces that may still be mixed with the paper. Additionally, an air classifier can help separate the lighter paper from the heavier copper through airflow.
West Bengal
yes copper sheeting is flexible because its turned into a paper like substance