0
What else can I help you with?
Is knob and tube wiring dangerous?
Not if it is maintained properly. However, in my opinion, I would rewire any home done in knob and tube with modern methods. As an electrician, exposed conductors in a residential setting just dont jive with me.
What is the effect of change the length of tube input liquid?
The effect of changing the length of tube input liquid depends on the type of device being used and the types of liquids being used. In general, increasing the length of the tube can cause a decrease in the amount of fluid being inputted. This is because the longer the tube, the more resistance the fluid faces when being forced through it. This resistance can cause a decrease in the velocity of the fluid, resulting in a lower flow rate. For example, when using a syringe to inject a fluid, increasing the length of the tube can cause the fluid to move slower, resulting in a smaller amount of fluid being inputted. If a pump is used to move a fluid, then increasing the length of the tube may increase the pressure the pump has to work against. This can cause the pump to work harder, resulting in less efficient operation, and possibly overheating. Finally, the type of liquid being used can also play a role in the effect of changing the length of the tube. For example, if a liquid is highly viscous, then increasing the length of the tube can cause an even larger decrease in the amount of fluid being inputted. This is due to the increased resistance the liquid has to overcome when being forced through the longer tube.
Does the number of electrons hitting the target controlled by mAs?
Yes, the number of electrons hitting the target is directly proportional to the tube current, which is controlled by the mAs setting on the X-ray machine. Increasing the mAs will increase the tube current, causing more electrons to hit the target.
Why was it necessary to heat the text tube in order for a chemical reaction to occur?
Heating the test tube provides the reactant molecules with more kinetic energy, increasing the likelihood of successful collisions that lead to a reaction. This helps break bonds and activate reactants, allowing the reaction to happen at a faster rate.
Where do afghans get their water?
Afghans primarily obtain their water from a combination of surface water sources, such as rivers and lakes, and groundwater through wells. The country relies heavily on seasonal rivers fed by snowmelt from the Hindu Kush mountains. In rural areas, many communities depend on hand-dug wells or tube wells, while urban areas often have piped water systems, although access can be limited. Overall, water scarcity and management are significant challenges in Afghanistan due to climate variability and infrastructure issues.
How can salinity be prevented?
By installing tube wells
Why was there a big demand for tube wells after 1960?
Between 1960 and 1970 about 16000 tube wells were installed each year. This large increase in the demand for tube wells led to the growth of the small scale engineering industry. by adeel ahmed prep 1 the city school
What are the factors on which irrigation depends?
Irrigation depends on water which is taken from the wells,tube-wells, ponds, rivers to water the plants.
What are the main types of irrigation systems in India?
the main types of irrigation systms in India are wells and tube wells tanks canals dams and lakes.
How can irrigation be improved with scarce water resources?
by harvesting water or by making tube wells etc
Where can you find pictures of tube wells?
http://images.google.co.uk/images?hl=en&client=firefox-a&channel=s&rls=org.mozilla%3Aen-GB%3Aofficial&um=1&sa=1&q=tube+wells&btnG=Search+images&aq=f&oq=
Is India better then china?
There are many reasons for it You can get these reasons through you tube Type the subject and you will get videos related to it
What are the disadvantages of tube wells?
Some disadvantages of tube wells include: Over extraction of groundwater leading to depletion of water resources. Potential for contamination of groundwater due to pollutants seeping into the aquifer. High initial cost and maintenance requirements. Dependency on a depleting water source in regions experiencing water scarcity.
Why are tube wells so important for farmers?
In areas where there is insufficient natural precipitation to produce the crops, tube wells provide an important source of the water necessary to grow the crop to maturity. In the western US, for example, there are many areas which are very productive with a great variety of crops that could not be grown without the addition of irrigation water. In areas without access to a river system to bring water to the fields, wells provide that source of water.
Why does my new inner tube keep deflating?
There could be several reasons why your new inner tube keeps deflating. Some common reasons include a puncture or leak in the tube, improper installation, or issues with the valve. It's important to carefully inspect the tube for any damage and ensure it is properly installed to prevent further deflation.
Is knob and tube wiring dangerous?
Not if it is maintained properly. However, in my opinion, I would rewire any home done in knob and tube with modern methods. As an electrician, exposed conductors in a residential setting just dont jive with me.
What effect do you think increasing the flow tube length will have on the fluid flow rate?
Increasing the flow tube length will typically result in a decrease in the fluid flow rate. This is because the longer flow tube increases the resistance to flow, causing a reduction in the flow rate of the fluid passing through it.
