Carbon disulfide or carbon tetrachloride would probably work. Frankly, the two you've named are among the ones I would be least worried about using, so unless you've got a very good reason for avoiding them specifically, you're probably better off going with one of them.
Difference Between Natural Rubber And Vulcanized RubberNatural rubber Vulcanized rubber(1) Natural rubber is soft and sticky Vulcanized rubber is hard and non-sticky. (2) It has low tensile strength. It has high tensile strength. (3) It has low elasticity. It has high elasticity. (4) It can be used over a narrow range of temperature (from 10° to 60°C). It can be used over a wide range of temperature (–40° to 100°C). (5) It has low wear and tear resistance. It has high wear and tear resistance. (6) It is soluble in solvents like ether, carbon, tetrachloride, petrol, etc. It is insoluble in all the common solvents.
HNBR rubber can be dissolved by solvents such as methyl ethyl ketone (MEK), toluene, and acetone. It is important to use proper safety precautions when handling these solvents, as they can be flammable and hazardous to health.
There is natural rubber, made from the latex of the rubber tree (Hevea brasiliensis).There are several manmade rubber compounds, including butyl rubber, neoprene, and nitrile rubber.
Rubber is a natural material derived from the latex of certain plants, such as the rubber tree. However, synthetic rubber is also made in a chemical process using petroleum byproducts. So, rubber can be both man-made and natural.
No nitrile rubber is a synthetic rubber polymer
Natural rubber is easily attacked by many oils, and solvents. In the open, ozone also attacks the intermolecular bonds.
Difference Between Natural Rubber And Vulcanized RubberNatural rubber Vulcanized rubber(1) Natural rubber is soft and sticky Vulcanized rubber is hard and non-sticky. (2) It has low tensile strength. It has high tensile strength. (3) It has low elasticity. It has high elasticity. (4) It can be used over a narrow range of temperature (from 10° to 60°C). It can be used over a wide range of temperature (–40° to 100°C). (5) It has low wear and tear resistance. It has high wear and tear resistance. (6) It is soluble in solvents like ether, carbon, tetrachloride, petrol, etc. It is insoluble in all the common solvents.
Rubber can shrink due to exposure to heat, solvents, or prolonged tension. Heat can break down the polymers in the rubber, causing it to contract. Solvents can dissolve components of the rubber, leading to shrinkage. Tension can alter the molecular structure of the rubber, causing it to compact.
HNBR rubber can be dissolved by solvents such as methyl ethyl ketone (MEK), toluene, and acetone. It is important to use proper safety precautions when handling these solvents, as they can be flammable and hazardous to health.
Mixing natural rubber with nitrile rubber is possible. In fact, it is quite common to mix natural rubber with other kinds of rubbers.
There is natural rubber, made from the latex of the rubber tree (Hevea brasiliensis).There are several manmade rubber compounds, including butyl rubber, neoprene, and nitrile rubber.
Natural rubber is created from the sap of the Rubber Tree. In fact, that is the only thing needed from the tree to produce natural rubber.
Natural rubber
Buna-N rubber can be dissolved by solvents such as acetone, methyl ethyl ketone (MEK), and toluene. It is important to use these solvents in a well-ventilated area and follow proper safety precautions when handling them.
Yes, natural rubber latex is biodegradable.
There is no such thing as a natural rubber, rubber is man made.
Natural rubber is a polymer built up of isoprene units. Latex is found in nature. It comes from rubber tree (Hevea Brasiliensis). Latex coagulates naturally and turn into dry natural rubber. Normally, latex containing 25 to 40% of dry rubber.