answersLogoWhite

0

The specifications for putting up a power pole vary based on the location and local regulations. Generally, power poles need to meet height requirements, be made of durable materials like wood or steel, and be installed with proper distance from buildings and other obstructions. It is important to consult with the local utility company or an engineer to ensure the power pole is installed correctly and meets all necessary specifications.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

How do you shimmy up a pole?

Strongly grab on to the pole with your hands pulling your body against the pole. Straddle the pole clamping thighs tightly together to allow moving hands up the pole and repeat. Alot of strain in arm muscles and legs to.


Do you end up with if you cut a magnet in half?

a norh pole and a south pole


Which is best double pole or single pole power socket?

there is no answer a single pole socket is a 120v and a double pole is 240v if you are talking about contactors it is completely up to the appliance but a double pole double throw is just as safe as a single pole single throw contactor, Example a single pole single throw will only disconnect the "hot" wire, not the neutral or ground wire and thus no voltage will pass however with a 240 v circuit a double pole single throw only disconnects one "hot" wire and will still have voltage through the circuit (120 volts not 240 though)and is not as safe as a double pole double throw that will disconnect both "hot" lines so no voltage is in circuit If you need electrical work done and do not completely know how to wire it up to code and be safe in the process hire a professional! >>>ITS WORTH YOUR LIFE<<<


How many tandem breakers are allowed in a panel board?

The number of tandem breakers allowed in a panel board varies depending on the manufacturer's specifications and the panel's design. Generally, most panel boards allow up to two tandem breakers per single-pole space, but it's essential to consult the panel board's labeling and specifications for the exact number allowed.


Does the prime meridian go up and down or left and right?

The prime meridian runs from the North Pole to the South Pole, so it goes up and down longitudinally.

Related Questions

How do you stop a horse putting in a half stride when coming into a jump?

Try putting a pole/s down coming up to the jump to guide their strides


Where can you find insulators near power lines?

look up the pole


How much to put up power pole and run power to a trailer in Florida?

around $500 a pole and $2 a foot about $1000 for the pole mounted transformer poles need to be less than 100' apart


Can you give me an example of a sentence using poll and pole?

She made a poll to see who the customers thought could stay up the longest on the stripper pole without putting a hand or foot on the floor.


Can you save money installing your own power pole in Brithish Columbia?

Yes, but it has to be up to the specficiation of B.C. Hydro. You have to find out what class of pole that is needed. Is the pole for a secondary drop or a primary installation?


Position of flag when it is flown midway up the pole?

Its called putting it at half mast. Usually they do it when someone important dies. When the poep died, I know that they do that for him.


Can you power a 110V power tool with a 240V plug?

If 240 power is supplied you can. Depends on power pole.


What math is used to simulate a car by putting in its specifications Assuming it's going perfectly straight not up or down hill it just needs to be a simple simulation?

Kinematics, the geometry of motion.


Where can you compare pick up trucks specifications?

There is a website called Cars to compare the specifications. You can also go to the manufacturers website to compare the pick up truck specifications.


What is the specifications of 5V DC motor?

5V dc motor is the best for the robotics materials and it is inexpensive as compared to the other motors. dc motor is made up of the magnetic coils consist north and south pole


What are the necessary requirements for setting up a 100 amp temporary power pole on a construction site?

To set up a 100 amp temporary power pole on a construction site, you will need to ensure the following requirements are met: Obtain necessary permits and approvals from local authorities. Install a suitable grounding system to prevent electrical hazards. Use proper wiring and connectors rated for 100 amps. Ensure the power pole is securely anchored to the ground. Follow all safety guidelines and regulations for temporary power installations.


What Matter in which particles line line up pole to pole?

The type of matter in which particles are lined up pole-to-pole is magnetic. The poles help create the force from electricity.