Mohs Hardness Scale is a scale that measures the hardness of minerals on a scale of 1 to 10, with 1 being the softest and 10 being the hardest. The scale is based on the ability of one mineral to scratch another, with a higher number indicating that the mineral can scratch those with a lower number.
The diamond has a rating of ten (10) on the Mohs scale of mineral hardness. On an interval scale, it has an absolute hardness of 1600 compared to 1 for talc. It is the hardest naturally occurring mineral, with only aggregated diamond nanorods (also known as hyperdiamonds) being harder.
The scale goes from 1 to 10 Talc (talcum powder) is the softest Diamond is the hardest examples of each point on the scale are: 1. Talc (Mg3Si4O10(OH)2) 2. Gypsum (CaSO4·2H2O) 3. Calcite (CaCO3) 4. Fluorite (CaF2) 5. Apatite (Ca5(PO4)3(OH-,Cl-,F-)) 6. Orthoclase Feldspar (KAlSi3O8) 7. Quartz (SiO2) 8. Topaz (Al2SiO4(OH-,F-)2) 9. Corundum (Al2O3) 10. Diamond (C)
The Mohs scale is used to measure the hardness of a mineral by its resistance to scratching. From softest to hardest, for example, the ten minerals of the Mohs scale are talc (measuring 1 on the scale), gypsum, calcite, fluorite, apatite, orthoclase, quartz, topaz, corundum, and diamond (measuring 10 on the scale). A sapphire is a 9.0.
Some examples of things in a group of ten include fingers on both hands, players on a soccer team, digits in the decimal system, or items in a pack of ten markers.
The hardest material in the world is Wurtzite, it is very much same as that of a diamond but is more complex than diamond and thus makes it stronger than diamond. Wurtzite boron nitride becomes 80% stronger after the re-orientation process, and this makes it the hardest substance found on earth.
Mohs Hardness Scale is a scale that measures the hardness of minerals on a scale of 1 to 10, with 1 being the softest and 10 being the hardest. The scale is based on the ability of one mineral to scratch another, with a higher number indicating that the mineral can scratch those with a lower number.
The numbers on the Mohs hardness scale represent the relative hardness of minerals. The scale ranges from 1 (softest) to 10 (hardest), with each number corresponding to a different mineral's ability to scratch or be scratched by another mineral.
Northwestern University is considered by many to be the hardest Big Ten university to get into.
The basic Moh's hardness scale consists of: 1. Talc (softest) 2. Gypsum 3. Calcite 4. Fluorite 5. Apatite 6. Feldspar 7. Quartz 8. Topaz 9. Corundum 10. Diamond (hardest)
The diamond has a rating of ten (10) on the Mohs scale of mineral hardness. On an interval scale, it has an absolute hardness of 1600 compared to 1 for talc. It is the hardest naturally occurring mineral, with only aggregated diamond nanorods (also known as hyperdiamonds) being harder.
Some minerals are hard yet some are soft. Talc is the softest mineral as diamond is the hardest mineral. You can look at this on the hardness scale. It goes from one to ten, so talc is one as diamond is ten.
Nine on a Ten Scale was created in 1976-05.
The scale goes from 1 to 10 Talc (talcum powder) is the softest Diamond is the hardest examples of each point on the scale are: 1. Talc (Mg3Si4O10(OH)2) 2. Gypsum (CaSO4·2H2O) 3. Calcite (CaCO3) 4. Fluorite (CaF2) 5. Apatite (Ca5(PO4)3(OH-,Cl-,F-)) 6. Orthoclase Feldspar (KAlSi3O8) 7. Quartz (SiO2) 8. Topaz (Al2SiO4(OH-,F-)2) 9. Corundum (Al2O3) 10. Diamond (C)
you just do .
Do you mean WHERE on the scale?
sunny kooner