The two wires that travel between two three way switches are called travelers.
If two ungrounded (hot) conductors touch or an ungrounded and a grounded (neutral) conductor accidentally touch, it is called a short or short circuit. If an ungrounded or a grounded conductor touch an equipment grounding conductor, it is called a ground fault.
SAN switches are at the heart of most SANs. SAN Switches can connect both servers and storage devices, and thus provide the connection points for the fabric of the SAN. • For smaller SANs, the standard SAN switches are called modular switches and can typically support 8 or 16 ports (though some 32-port modular switches are beginning to emerge). Sometimes modular switches are interconnected to create a fault-tolerant fabric. • For larger SAN fabrics, director-class switches provide a larger port capacity (64 to 128 ports per switch) and built-in fault tolerance.
Usually called a "junction box."
Generically they are called conductors.
such substances are conductors of electricity.
Circuit
If you connect the terminals together with them unhooked from the battery and the engine off, yes that is also called a capacitive discharge.If you connect the terminals together with them unhooked from the battery and the engine off, yes that is also called a capacitive discharge.
networking
Connect five lines together
The ligaments forms a joint to connect and hold bones together.
They're called conductors. As opposed to insulators, which don't conduct. Metals are typically pretty good conductors.
*Pair *Conjoin *Connect *Combine *Abut *Adjoin *Bound *Meet *Connect *Compound....
what is a distinguished conductor called
Capacitance is an ability to store an electric charge. "If we consider two same conductors as capacitor,the capacitance will be small even the conductors are close together for long time." this effect is called Stray Capacitance.
If two ungrounded (hot) conductors touch or an ungrounded and a grounded (neutral) conductor accidentally touch, it is called a short or short circuit. If an ungrounded or a grounded conductor touch an equipment grounding conductor, it is called a ground fault.
conductors
A baton.