0
If this is a standard light controlled by two switches you will need to use the red wire too. For more information and a wiring diagram see the answer to the Related Question shown below.
<><><> Maybe you need to use the red wire not the black? In situations where you have black and red wire in light boxes, the black is often used as an "always hot" wire coming from the breaker panel and the red is then used as the "switched hot" wire. But do not assume anything when working with household electricity: you must always check with a properly insulated voltmeter or some other type of safely insulated voltage indicating device. <><><>
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
What else can I help you with?
How do you connect a 3 wire fixture to a 2 wire fixture that are connected to the same switch what do you connect the red wire to?
A three wire fixture most likely is one that has two separate loads within it. An example is a ceiling fan with a light fixture. If the three wire is used to separately switch the two loads you have to make a decision as to which load you want to work with the two wire fixture. Once that decision has been made connect the two wire fixture in parallel with the your selected load on the three wire fixture. On these types of installations the three wire fixture is usually controlled by two separate switches in a two gang box. The red and black wires of the three wire terminates on the bottom of either switch. The white wire is connected to the incoming neutral. The top of the switches are paralleled together with the "hot" feeder from the distribution source.
What light switch is used when 2 switches control one circuit?
When two switches control one circuit, a three-way switch is used. This type of switch allows for the control of a single light fixture from two different locations, making it ideal for hallways or large rooms. The wiring configuration enables the switches to work in tandem, so either switch can turn the light on or off.
What is the definition of 'traveler' in relation to residential wiring?
"Travelers" are the two switched wires running between three-way (or four-way) switches to operate lights from multiple locations. Depending upon circuit configuration (swx/swx/lt or swx/lt/swx), the third wire in a "3-way" cable could be either "hot" or "neutral" at all times and the bare copper wire is always an equipment grounding conductor.
Can you connect one single light switch to another single light switch to control the same light on or off.?
Yes you can. There are three ways of doing this. Two are incorrect and one is the correct way of doing it.The two switches can be paralleled together to make the light fixture respond. Both of the two switches will always have to be in the on position. Either switch will turn the light off but the second switch will not turn the light on. Very inconvenient when you enter a room through one door and leave by another.The two switches can be wired in series. Both switches have to be on to operate the light but again if one of either switch is left in the off position the other switch will not operate the light fixture. Very inconvenient when you enter a room through one door and leave by another.The correct way of wiring two switches to control a central light fixture is with a three way switching system (two way in the UK). The two positions have to have special three way switches in each position. These types of switches sort out the problems of leaving a switch in a certain position to operate properly. The only criteria is that there be a three conductor cable joining the two three way switch boxes together.See related links below.
Intermediate switch layout?
An intermediate switch layout involves two switches controlling a single light fixture. One switch is typically located at each end of a corridor or staircase, allowing the light to be turned on or off from either location. This layout requires a three-core and earth cable to connect the switches and the light fixture.
How do you wire 2 3-way switches to control a single light fixture?
To wire 2 3-way switches to control a single light fixture, you will need to connect the switches in a specific way. The power source should be connected to the first switch, then a traveler wire should be connected between the two switches. Finally, the light fixture should be connected to the second switch. This setup allows you to control the light fixture from either switch.
How can I properly wire two switches to control a single light fixture?
To properly wire two switches to control a single light fixture, you will need to use a three-way switch setup. Connect the power source to the common terminal of the first switch, then connect the traveler wires to the corresponding terminals on both switches. Finally, connect the light fixture to the common terminal of the second switch. This setup allows either switch to control the light fixture independently.
How do 3 way switches work in a lighting circuit?
Three-way switches work in a lighting circuit by allowing you to control a single light fixture from two different locations. The switches are connected in a way that allows you to turn the light on or off from either switch, regardless of the position of the other switch. This is achieved by using a traveler wire to connect the two switches and a common wire to connect the light fixture.
How can I control a single light with two switches?
You can control a single light with two switches by using a three-way switch setup. This involves connecting the light fixture to two three-way switches, allowing you to turn the light on or off from either switch.
How does three-way wiring work in electrical circuits?
Three-way wiring in electrical circuits involves two switches controlling a single light fixture. The switches are connected in a way that allows the light to be turned on or off from either switch, regardless of the position of the other switch. This is achieved by using a traveler wire to connect the switches and a common wire to connect the light fixture.
What is the 3 way light wiring diagram for installing a three-way switch in a circuit?
A 3-way light wiring diagram for installing a three-way switch in a circuit shows how to connect two switches to control a single light fixture. The diagram includes two switches, a power source, and the light fixture. The switches are connected in a way that allows the light to be turned on or off from either switch.
How do three-way switches work in a lighting circuit to control a single light fixture from two different locations?
Three-way switches in a lighting circuit use two switches to control a single light fixture from two different locations. The switches are connected in a way that allows either switch to turn the light on or off, regardless of the position of the other switch. This setup creates a convenient way to control the light from multiple points in a room.
How do you wire two switches to control one light?
To wire two switches to control one light, you need to connect the two switches in parallel. This means connecting the hot wire from the power source to the common terminal of both switches, and then connecting the light fixture to the common terminal of the switches. This setup allows either switch to turn the light on or off independently.
How can I properly set up two switch wiring for controlling a single light fixture?
To properly set up two switch wiring for controlling a single light fixture, you will need to use a three-way switch configuration. This involves connecting the light fixture to two separate switches, allowing you to control the light from either switch. Make sure to follow the wiring diagram for three-way switches and connect the wires accordingly to ensure proper functionality.
How does old style 3-way switch wiring work in a residential electrical system?
Old style 3-way switch wiring in a residential electrical system uses two switches to control a single light fixture from different locations. The switches are connected in a way that allows either switch to turn the light on or off regardless of the position of the other switch. This is achieved by using a traveler wire to connect the switches and a common wire to connect the light fixture.
Can you provide a three way light switching diagram for me to understand the wiring configuration better?
A three-way light switching diagram shows how two switches can control one light fixture. In this setup, one switch is connected to the power source, the other switch is connected to the light fixture, and the two switches are connected to each other. This allows you to turn the light on or off from either switch.
How does a 3-way electrical switch function in a lighting circuit to control the same light fixture from two different locations?
A 3-way electrical switch in a lighting circuit allows you to control the same light fixture from two different locations. The switches are connected in a way that allows either switch to turn the light on or off, regardless of the position of the other switch. This is achieved through a specific wiring configuration that enables communication between the switches to control the flow of electricity to the light fixture.
