The color of a star is a good indicator of its temperature.
An indicator refers to a substance that changes color to show how a given substance is either acidic or basic.
A Ka value of 1.25 x 10-4 indicates a weak acid. This means that the indicator would be most effective at detecting solutions with a pH close to the pKa value of the indicator, which is approximately 3.9. Therefore, the indicator could be used to determine if a solution has a pH above or below 3.9.
The color of the EBT indicator changes from red to yellow as pH increases. EBT transitions from its acidic form to its basic form as pH rises above its pKa of approximately 7.0, causing the color change.
A bank-and-turn indicator is an instrument in an aircraft cockpit which incorporates the functions of a bank indicator and a turn indicator.
None of the Above
An indicator card is what you either get at school or somewhere else and it has things like what classes you have or where you are and what time you will be there at and until what time
The color of a star is a good indicator of its temperature.
An indicator refers to a substance that changes color to show how a given substance is either acidic or basic.
When an alkali is added to universal indicator, the color of the indicator will typically change to blue or purple, indicating a high pH. Alkalis are substances that have a pH above 7 and tend to turn universal indicator towards the blue end of the spectrum.
D: all of the above
There are three, if it is in the middle at the bottom of the row of indicator lights then its the check engine light. If it is above the fuel gauge then its either the low fuel light or the abs light.
what can you learn about the growth of the greek empire from the primary source above
http://golfgtiguides.co.uk/guides/remove-mk5-wing-mirror-and-change-indicator/ see the above site...
how did the scientist know about the information in above
A Ka value of 1.25 x 10-4 indicates a weak acid. This means that the indicator would be most effective at detecting solutions with a pH close to the pKa value of the indicator, which is approximately 3.9. Therefore, the indicator could be used to determine if a solution has a pH above or below 3.9.
To program the learn button on your Linear garage door opener, press and hold the learn button on the opener until the indicator light turns on. Then, within 30 seconds, press the desired button on your remote control to sync it with the opener. The indicator light should flash to confirm the programming.