answersLogoWhite

0

It depends on what you are attaching to the sheet metal. Are you screwing together two layers of sheet metal? Or are you attaching a wooden block, for example, to the sheet metal?

metal frame to the sheet metal

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How far apart should screws be placed in a metal roof?

how far apart should screws be placed ina metal roof


Is it best to braze or sodier 24 gauge stove pipe?

If its made from tin then neither is appropriate. It should be riveted, or joined with self-tapping sheet metal screws.


what are different types of mounting screws?

Different types of mounting screws include wood screws, machine screws, self-tapping screws, and sheet metal screws. Wood screws are designed for use with wood and have a sharp tip for easy penetration. Machine screws are used with nuts or in tapped holes and offer a uniform diameter. Self-tapping screws create their own thread in materials like metal or plastic, while sheet metal screws are specifically designed for fastening metal sheets.


What is the thickness of a 9 gauge wire?

3 gauge metal plate is approximately 1/4 inchthick.


Is 400gauge thicker than100gauge?

No. The lower the gauge the thicker the material. This is common in sheet metal and wire thickness (diameter).


What is Birmingham wire gauge?

It was a system used to specify the thickness or diameter of metal wire. It was improved and renamed British Standard Wire Gauge in 1883, usually abbreviated to SWG.


What gauges has a diameter of 204.3 mils?

A diameter of 204.3 mils corresponds to a gauge size of approximately 10 gauge when referring to wire or metal thickness. In the context of sheet metal, it is important to note that gauge measurements can vary based on the material being used. For steel, 10 gauge has a thickness of about 0.1345 inches (3.4 mm), while for aluminum, it would be slightly thicker. Always refer to specific gauge charts for precise conversions based on the material type.


18 gauge is how thick - 0478 inch?

18 gauge solid copper wire is 40.3 mils in diameter, that is 0.0403" stranded would be larger.


How big is gauge?

It depends on whether you are referring to sheet metal, wire or a shotgun. For sheet metal, 20 gauge is a thickness of 0.0359 inches (steel), 0.0396 inches (galvanized steel) or 0.0320 (aluminum). In American Wire Gauge (AWG), a 20 gauge wire is 0.032 inches (0.813mm) in diameter. A 20-gauge shotgun is a caliber of 0.615 inches (15.621mm).


How big is 20 gauge?

It depends on whether you are referring to sheet metal, wire or a shotgun. For sheet metal, 20 gauge is a thickness of 0.0359 inches (steel), 0.0396 inches (galvanized steel) or 0.0320 (aluminum). In American Wire Gauge (AWG), a 20 gauge wire is 0.032 inches (0.813mm) in diameter. A 20-gauge shotgun is a caliber of 0.615 inches (15.621mm).


What is minimum gauge metal on 14 or less duct?

The minimum gauge for metal ductwork that is 14 inches or less in diameter is typically 26 gauge for galvanized steel. However, for applications requiring higher durability or strength, such as in commercial settings, 24 gauge may be used. Always refer to local building codes and standards for specific requirements.


What type of screws are recommended for securing metal doors?

The type of screws recommended for securing metal doors are self-tapping screws or machine screws. These screws are designed to securely fasten metal doors in place.