Really need more info.lighting fixture on ceiling fan.ect.......
It is not recommended to rewire a 240v lamp light fitting or appliance to operate on 110v. This can be dangerous and may lead to overheating, electrical fires, or damage to the device. It is safer and more practical to use a voltage converter or purchase a new device designed to work with 110v.
No, incandescent lamp dimmers are not compatible with fluorescent lamps. Fluorescent lamps require special dimming ballasts to control their light output. Attempting to use an incandescent lamp dimmer with a fluorescent lamp can cause damage to the lamp and dimmer.
Yes, you can use a fluorescent bulb in a floor lamp as long as the bulb fits the lamp's socket and wattage requirements. Make sure to check the lamp's specifications to ensure compatibility and consider the lighting quality and intensity of the fluorescent bulb for your needs.
Probably not. Sodium light fixtures generally have a "ballast".
It is not recommended to use a 250 watt bulb in a lamp designed for a maximum wattage of 150 watts. Doing so can potentially cause overheating, damage the lamp socket or wiring, and create a fire hazard. Always use the correct wattage bulb recommended for your lamp to ensure safety.
mains plug
mains plug
mains plug
A lamp or light fitting will light up if connected to either Alternating Current (AC), or Direct Current (DC). AC is from the mains, and DC is from a battery. So it depends on the construction and components used to construct the lamp as to which electrical source you use.
Both are acceptable with different meaning. I read by the light of the lamp means I use the lamp to light the pages so that I can read them. I saw it in the light of the lamp means it was visible in that pool of light caused by the lamp.
the uses of lamp is to light us.....
It is not recommended to rewire a 240v lamp light fitting or appliance to operate on 110v. This can be dangerous and may lead to overheating, electrical fires, or damage to the device. It is safer and more practical to use a voltage converter or purchase a new device designed to work with 110v.
For your lamp, you should use a standard medium base socket light bulb.
Use pink light bulbs they will make you look prettier. Use blue light bulbs to make soft light. If you have a lamp, drape a scarf over it to dim the light. Install a dimmer switch to adjust the lighting.
The first step in making a straw parol is to use wire to make the skeleton of the lamp. Make different sized circles out of wire and string them together with the largest one in the center. Then cover the outside of the lamp with tissue paper or straw if available. Use glue to fasten strips to wire. A battery operated tea light can then be glued inside the top of the lamp for light.
Provided the bulb is rated at 60 Watts or less and the fitting is compatible, yes.
A children's night light or lamp is ment for use at night. Giving off just enough light to allow a child to enjoy the safely of the light and not fear the dark. While a normal lamp is ment for general use during the day, to light up a room.