It plates the needle
Stroking a needle with a magnet aligns the magnetic domains in the needle material in the same direction, causing the needle to become magnetized. This alignment of domains creates a magnetic field in the needle, giving it magnetic properties.
Thread the cotton through the eye of the needle, leaving a tail to hold onto. Hold the needle steady and start sewing by pushing the needle in and out of the fabric. Remember to knot the thread at the end to secure your stitches.
it is destiny needle, and magnetic needle storm. :)
It is still a needle, but could be referred to as a compass needle.
The needle clamp holds the needle in place on the sewing machine, preventing it from shifting or falling out during sewing. It helps ensure that the needle stays aligned with the machine's mechanisms, allowing for precise stitching.
holds the needle
Common causes are: Wrong or incorrectly fitted needle, damaged or loose shuttle race, debris in race, or incorrect timing of hook. Also check position of needle through needle plate, incorrect positioning may cause needle to strike plate while sewing.
A slide plate, also known as a needle plate or throat plate, is a component of a sewing machine that sits beneath the needle and feed dogs. It provides a smooth surface for the fabric to slide over as it is being sewn and often features markings to help with seam allowances. The slide plate typically has an opening for the needle to pass through and can sometimes be removed for cleaning or access to the bobbin. Proper alignment and maintenance of the slide plate are essential for achieving accurate stitching and preventing fabric jams.
the throat plate covers the opening to the shuttle and shuttle basket. it is also a seam gauge.
"treadles" refer to the foot plate under the old-timey machine. You rock the plate up and down, to move the needle up and down....
The plate that surrounds the feed dog on a sewing machine is called the needle plate or throat plate. It is typically made of metal and features a slot for the needle to pass through, as well as openings for the feed dog to move fabric. This plate helps guide the fabric and provides a stable surface for sewing. Additionally, it often has markings to assist with seam allowances and alignment.
The face plate is the vertical plate on the left side of the sewing machine. It is a protective covering for the needle bar and thread take-up mechanism. See the diagram linked below for a visual.
if it is the needle plate itself -- it is interchangeable with singer 14T948DS which can be ordered thru several sewin machie parts outlets. if it is the small removeable part with the tines on it -- you can order it from searspartsdirect.com it is terchangeable with a couple of other singer machines. part #B10311004 they are about $6 and change
NounA steel needle for engraving on a bare copper plate without acid.An engraving or print so produced.
NounA steel needle for engraving on a bare copper plate without acid.An engraving or print so produced.
Technically because the loop has greater surface area and you have a chance of touching more than one colony. That is very hard to do with a needle. Still, if you turn your loop on edge and dab like a needle it will do the job just as well. Also, if you have any competence at all your streak plate will have well isolated colonies in the 3rd/4th streak making this question pointless.
One way to demonstrate the existence of magnetic force is by using a compass needle which aligns itself with the Earth's magnetic field. When a magnet is brought near the compass needle, it will cause the needle to deflect and align with the magnet's field, illustrating the presence of a magnetic force.