0
A resonator is a circuit that responds to a narrow range of frequencies. A typical resonator is a tuned circuit containing an inductor and a capacitor in series or parallel. A series connected tuned circuit has zero impedance at the resonant frequency, while a parallel tuned circuit has infinite impedance at the resonant frequency.
The resonant frequency in both cases depends on the inductance times the capacitance:
F = 1 / (2.pi.sqrt(LC))
If the inductance is in Henrys and the capacitance in Farads, the answer is in Hz.
What else can I help you with?
What causes a electric current in a electric circuit?
Voltage causes current to flow in an electric circuit.
Is an electric circuit an electric charge in motion?
yes
What would happen if there is no an electric switch in a curcuit?
Generally we use electric switches to put on or off the light,fan,computer,music system,etc.An electric switch is a device that is used to open or close an electric circuit.when we open an electric circuit the flow of electric current inthe circuit stops and when we close an electric circuit an electric current flows through it.
Does an electric circuit have a beaker?
No, an electric circuit does not have a beaker. A beaker is a container used for holding liquids, whereas an electric circuit consists of components like wires, batteries, resistors, and switches that allow electricity to flow in a specific path.
What is the type of circuit called when it has an conductor a switch a electric cell a resistor?
The type of circuit you are describing is known as a simple circuit. It consists of a power source (electric cell), a switch, a conductor (usually wire), and a resistor to control the flow of electric current.
What has the author William Stockton Nelms written?
William Stockton Nelms has written: 'A systematic study of linear and non-linear resonators for short electric waves' -- subject(s): Electric resonators, Electric waves
What has the author Paul Vigoureux written?
Paul Vigoureux has written: 'Quartz resonators and oscillators' -- subject(s): Crystal Oscillators, Electric resonators, Quartz crystals 'Quartz vibrators and their applications' 'Units and standards for electromagnetism' -- subject(s): Electromagnetism, Units, Units of measurement 'Quartz oscillators and their applications' -- subject(s): Crystal Oscillators, Electric Oscillators, Electric resonators, Pyroelectricity, Quartz
What has the author P Vigoureux written?
P. Vigoureux has written: 'Quartz resonators and oscillators' 'Electric units and standards'
Closed path where electric current can flow is called a?
I guess Electric Circuit....
The pathway taken by an electric current is a?
The term is "circuit" (from the same root as circle) An electric circuit must be uninterrupted for the current to flow. (This is why circuit-breakers are also called circuit-interruptors.)
What causes a electric current in a electric circuit?
Voltage causes current to flow in an electric circuit.
What is the history of the electric circuit?
the history of the electric circuit is that the person who made it his name is jack kilby but the history is that the electric circuit was one of the easiest way was to make the electric circuit when the electricity went out. THE END
How can you make the electric circuit?
Anything with a voltage power source, connecting wire and a load is an electric circuit. Hence if you have a flashlight you have an electric circuit.
Impedience of electric circuit?
The impedance of an electric circuit is the measure of the opposition presented by a circuit when the current and voltage is applied.
What is the difference between lumped element and distributed element resonators?
Lumped element resonators use discrete components like capacitors and inductors to create resonance, whereas distributed element resonators use transmission lines to create distributed capacitance and inductance throughout the structure. Lumped element resonators are typically smaller and easier to design but have limited bandwidth compared to distributed element resonators, which are larger but offer wide bandwidth and better performance at higher frequencies.
How can you start and stop electric circuit?
You can start an electric circuit by closing the circuit, typically by turning a switch on. You can stop an electric circuit by opening the circuit, usually by turning a switch off or disconnecting a wire.
How does a electric circuit work?
When energy passes through a metal it creates an electric circuit.
