You connect it with the same hot wire as the black wire in the fan. It is intended to be tied to a different switch. One for the fan, and one for the light kit.
Black to Black - Black from the ceiling is a hot wire and should be switched Red to Blue - Red wire is another hot wire and should also be switched White to White - White from the ceiling is the neutral and should not be switched. Your wall should have two switches, one will control the red wire, one will control the black wire. If you wire your fan as above, one switch will turn the fan on, the other will turn the light of the fan on.
Normally red or black is the hot wire and green is the ground. However someone may have used the green wire as the neutral wire which is normally white. Just connect the black wire from the light to the red wire and the white wire from the light to the green wire and see if it works. If not you have to pull the wires out of the ceiling box and see how they wired it.
Each color means a different thing and there are green ones, they are just not as common There should be a bare wire along with the red, black and green wires in the ceiling. It is possible that it was cut off short or tied up to the box somewhere. this is the same as the green wire.
Connect the black wire from the ceiling box to the black wire on the light. Connect the white wire from the ceiling box to the white wire on the light. The yellow and green striped wires from the light are likely the ground wires, secure these to the green or bare copper wire in the ceiling box. Cap off or tape the red wires from the ceiling box, as they are likely for a separate function and are not needed for the light fixture.
The red wire is typically used for the live or hot wire, and the black wire is commonly used for the neutral wire. The specific wire connections may vary depending on the electrical circuit, so it's important to consult a professional electrician for proper installation.
The purpose of the red wire hanging from the ceiling that is not connected to the fan is likely for future use or as a spare wire for additional electrical connections.
The purpose of the red wire hanging from the ceiling is to provide electrical power to a device or fixture that needs to be connected to the electrical system.
The red wire on a ceiling fan is typically connected to the fan's light kit. It should be connected to the corresponding red or blue wire in the ceiling electrical box. Make sure to follow the manufacturer's instructions for proper installation.
Black to Black - Black from the ceiling is a hot wire and should be switched Red to Blue - Red wire is another hot wire and should also be switched White to White - White from the ceiling is the neutral and should not be switched. Your wall should have two switches, one will control the red wire, one will control the black wire. If you wire your fan as above, one switch will turn the fan on, the other will turn the light of the fan on.
The red wire on a ceiling fan is typically used to connect the fan's light kit. It carries the electrical current needed to power the lights on the fan.
To wire a ceiling fan with a light, you will need to connect the fan's wires to the corresponding wires in your ceiling. Typically, you will connect the fan's black wire to the ceiling's black or red wire, the white wire to the white wire, and the green or bare wire to the ceiling's grounding wire. For the light, you will connect its wires in a similar manner. It's important to follow the manufacturer's instructions and turn off the power before starting the installation.
Normally red or black is the hot wire and green is the ground. However someone may have used the green wire as the neutral wire which is normally white. Just connect the black wire from the light to the red wire and the white wire from the light to the green wire and see if it works. If not you have to pull the wires out of the ceiling box and see how they wired it.
The red wire in ceiling fan wiring is typically connected to the fan's light kit. It should be connected to the red or blue wire coming from the ceiling fan's light kit. Make sure to follow the manufacturer's instructions and turn off the power before making any connections.
The red wire in a ceiling fan installation is typically used to connect the fan's light kit to a separate wall switch, allowing for independent control of the fan and light.
To properly wire a ceiling fan, first turn off the power at the circuit breaker. Then, follow the manufacturer's instructions for connecting the wires from the fan to the corresponding wires in the ceiling. Typically, this involves connecting the black wire to the black or red wire, the white wire to the white wire, and the green or bare wire to the ground wire. Use wire nuts to secure the connections and ensure they are tight. Finally, secure the fan to the ceiling according to the manufacturer's instructions.
Each color means a different thing and there are green ones, they are just not as common There should be a bare wire along with the red, black and green wires in the ceiling. It is possible that it was cut off short or tied up to the box somewhere. this is the same as the green wire.
Connect the black wire from the ceiling box to the black wire on the light. Connect the white wire from the ceiling box to the white wire on the light. The yellow and green striped wires from the light are likely the ground wires, secure these to the green or bare copper wire in the ceiling box. Cap off or tape the red wires from the ceiling box, as they are likely for a separate function and are not needed for the light fixture.