0
In choosing solvent i would consider the following factors:
What are the solutes? - are they polar or nonpolar how should they be dissolved
What is the next step? - E.G. Do you need to distil or heat, then boiling point would be important.
Is the solvent inert? Obviously side reactions are bad so choose a solvent which will not react. Good solvents are ethyl ether or ethyl alcohol.
What else can I help you with?
How do you decide what steps to take before separating a mixture?
To separate a mixture, first identify the physical properties of the components, such as boiling point or solubility. Then, choose a suitable separation technique based on these properties, such as distillation for volatile components or filtration for insoluble solids. Finally, apply the chosen technique sequentially to isolate the components effectively.
What provides the greatest surface area upon which a solvent can strip solute particles?
We can identify which solvent can strip solute particles with the greatest surface if we have the option to choose from. This statement is not a definition, it is an analogy question for a given situation.
How do you choose an appropriate catalyst for a substitution reaction?
To choose an appropriate catalyst for a substitution reaction, consider factors such as the nature of the reactants, reaction conditions (temperature, pressure), mechanism of the reaction, and desired selectivity or yield. Common catalysts for substitution reactions include Lewis acids or bases, transition metals, enzymes, or heterogeneous catalysts. Conducting preliminary experiments or consulting the literature can help in selecting a suitable catalyst.
What is electromotive series in terms of choosing the suitable electrode in setting up an electrochemical cell?
The electromotive series is a list of elements in order of their standard electrode potentials. When setting up an electrochemical cell, it is important to choose electrodes that have a large difference in standard electrode potential to maximize the cell's efficiency. This helps in determining which electrodes would make a suitable combination for generating the desired voltage in the cell.
How can the solubility of a solution be decreased?
Solubility of a solution can be decreased by adding a solute that is insoluble or less soluble in the solvent, reducing temperature, or increasing pressure for gases. These can shift the equilibrium towards the formation of solid precipitates, reducing the amount of solute that can remain dissolved in the solution.
Is benzhydrol suitable for recrystallization of bezhydrol?
Yes, benzhydrol can be suitable for recrystallizing benzhydrol. Recrystallization is a common technique used to purify solid compounds by dissolving them in a suitable solvent and allowing them to slowly crystallize out. It is important to choose a solvent in which the compound is more soluble at high temperatures and less soluble at low temperatures to achieve successful recrystallization.
How can one determine the appropriate solvent system for TLC?
To determine the appropriate solvent system for TLC (thin layer chromatography), one can consider the polarity of the compound being analyzed and choose a solvent system with a polarity that allows for good separation of the compounds on the TLC plate. Testing different solvent systems with varying polarities can help identify the most suitable one for the specific compounds being analyzed.
What is the suitable solvent to dissolve yttrium manganese oxide nanoparticles to study particle size analysis?
Ethanol or isopropyl alcohol are commonly used solvents to dissolve yttrium manganese oxide nanoparticles for particle size analysis, as they are relatively non-reactive and can maintain the stability of the nanoparticles. Ensure to choose a solvent that will not interfere with the analysis technique being used for particle size measurement.
Why don't scientists use water as a solvent when carry out tests?
Scientists do not always use water as a solvent for tests because water may not be compatible with the substances being tested. Water's polarity can interfere with reactions involving non-polar substances. Additionally, water's pH may not be suitable for certain reactions. Scientists may choose other solvents such as organic solvents like ethanol or acetone that are better suited for specific tests based on the properties of the substances being tested.
How did van gogh choose his technique?
I don't exactly know how he chose his technique but I do know what his technique it is little flecks of colour
How do you choose a suitable programming language?
spain
In liquid -liquid extraction what factors you consider to choose select the proper solvent as an example consider the extraction of benzoic acid from water?
When choosing a solvent for liquid-liquid extraction, factors to consider include the solubility of the target compound in the solvent, the selectivity of the solvent to the target compound, the density difference between the two phases to aid in separation, and the cost and toxicity of the solvent. For extracting benzoic acid from water, a suitable solvent might be ethyl acetate, as it has a good solubility for benzoic acid and can be separated easily due to its density difference with water.
How do you decide what steps to take before separating a mixture?
To separate a mixture, first identify the physical properties of the components, such as boiling point or solubility. Then, choose a suitable separation technique based on these properties, such as distillation for volatile components or filtration for insoluble solids. Finally, apply the chosen technique sequentially to isolate the components effectively.
Why was the entire purpose of the early Apollo missions to choose a suitable place to land on the moon?
Why was the entire purpose of the early Apollo missions to choose a suitable place to land on the moon
In liquid liquid extraction what factors you consider to choose select the proper solvent as an example consider the extraction of benzoic acid from water?
In choosing a proper solvent for liquid-liquid extraction of benzoic acid from water, factors to consider include solubility of the solute in the solvent, density difference between the solvent and water for easy phase separation, and the ability of the solvent to form a distinct phase with water. In this case, a non-polar solvent like diethyl ether or ethyl acetate could be suitable as they have good solubility for benzoic acid and can form a separate layer with water for easy separation.
Is it possible to increase a solvent's boiling point to more than 2500C?
The boiling point of beryllium is 2742 °C at sea level. If you can't move the solvent's boling point, you can always choose a different solvent.
How do they choose the countries that hold the Olymipics?
The country signs up and the Olympics people choose who is most suitable and who will make it the best
