0
What else can I help you with?
What happen if fuse is connected to neutral wire?
The fuse will be blown off in case of any fault. But the circuit will not be isolated because of the presence of fuse in nutral line. current will still flow and the line will be so dangerous.
Why is it important that the live wire not the neutral wire is connected to the fuse?
Suppose there is a fuse which is connected to a live wire and it breaks some day because of excessive power supply. The light goes off because of that. You think that there is no power supply, but actually the neutral wire is taking current towards you. You carelessly try to repair the fuse, and you get a shock. Thus, neutral wires are not preferred in fuse.
Do you connect a fuse to the live wire or the neutral wire?
A fuse is typically connected to the live wire in a circuit. This is done to protect the circuit from an overload or short circuit, as the fuse will blow or trip and cut off the current flow if there is an issue.
Why the fuse is placed in live wire only?
So that the live wire is isolated when the fuse blows. If a fuse was placed in the neutral, the equipment would still be live when the fuse blows.
An electrical tool that melts to open a curcuit?
fuse
Why is the fuse connected to the live wire?
because current flows through live wire
What happen if fuse is connected to neutral wire?
The fuse will be blown off in case of any fault. But the circuit will not be isolated because of the presence of fuse in nutral line. current will still flow and the line will be so dangerous.
How can measure nutral and earthing wire?
Nutral wire can be measured by using clamp meter, if there is a current passing through the wire, we got a reading in the clamp meter i.e. 2A. If we clamp the earth wire by the clamp meter the reading will be zero.
A fuse should be conected between?
A fuse should be connected in the live wire, before reaching the appliance.
Why is it important that the live wire not the neutral wire is connected to the fuse?
Suppose there is a fuse which is connected to a live wire and it breaks some day because of excessive power supply. The light goes off because of that. You think that there is no power supply, but actually the neutral wire is taking current towards you. You carelessly try to repair the fuse, and you get a shock. Thus, neutral wires are not preferred in fuse.
What happens if you incorrectly connect old black wire to new white wire?
If the wires are incorrectly connected the idea is that it will blow the fuse.
Why is an insulator required for the body of a fuse?
The wire element of a fuse is ONLY effective if it is connected to each end as the only metallic connection. The insulator is required to hold the wire element, and so that people can install and remove the fuse.
Does subwoofer have fuse?
No the subwoofer itself does not contain a fuse. The Amplifier Connected to the sub should consist of a fuse or the power wire leading to the amp should contain one.
'What happens when a live electric wire falls into a river'?
The wire becomes connected to earth. In most situations this would result in a blown fuse.
Where is the fuse for an 2007 Impala rear defrost?
There is no fuse, it is directly connected and when it burns out it destroys the wire harness. Found this out the hard way on my 07 Impala.
Do you connect a fuse to the live wire or the neutral wire?
A fuse is typically connected to the live wire in a circuit. This is done to protect the circuit from an overload or short circuit, as the fuse will blow or trip and cut off the current flow if there is an issue.
Why Lighter doesn't work in 1990 ford ranger?
Check fuse block for blown fuse; also check the wire connector terminal directly behind the lighter itself...wire might not be properly connected.
