It will melt at first and then slowly start to vaporize
The deposit on the porcelain dish from holding it over a luminous flame is likely a mixture of soot, carbon, and other combustion byproducts. This can result from incomplete combustion of organic materials present in the flame.
The blue flame is really hotter than the yellow flame. If you put your hand over a blue flame and skim through it, it would burn you but if you put it over a yellow flame it wouldn't burn you that much.
When sodium ions are sprayed over a flame, they impart a yellow-orange color to the flame due to excitation of the sodium atoms. This phenomenon is used in flame testing to identify the presence of sodium in a sample.
it doesnt change its color
Carbon dioxide is a heavy gas that displaces oxygen, which is necessary for a flame to burn. By pouring carbon dioxide over the flame, the oxygen around the flame is depleted, causing the flame to be extinguished.
When held over a safety flame, white porcelain may become dirty or sooty from the flame. The heat may also cause the porcelain to change color slightly or develop a smoky residue on its surface.
NOTHING
Porcelain is very heat resistant, so you can put it in a flame and it will remain intact, but it will also get extremely hot. Be careful not to burn yourself.
The deposit on the porcelain dish from holding it over a luminous flame is likely a mixture of soot, carbon, and other combustion byproducts. This can result from incomplete combustion of organic materials present in the flame.
Porcelain will turn black when heated over a Bunsen burner due to carbon deposits from incomplete combustion of the gas. The carbon particles are deposited on the surface of the porcelain, causing it to appear black.
If you were to spray potassium over a Bunsen burner flame it should emit a lilac/purple colored flame due to the presence of potassium ions.
Well, generally afterwards, you eat it. :)
The blue flame is really hotter than the yellow flame. If you put your hand over a blue flame and skim through it, it would burn you but if you put it over a yellow flame it wouldn't burn you that much.
When sodium ions are sprayed over a flame, they impart a yellow-orange color to the flame due to excitation of the sodium atoms. This phenomenon is used in flame testing to identify the presence of sodium in a sample.
it doesnt change its color
If an empty pot is put over a flame, the pot will heat up rapidly as the air inside expands and can create pressure. Without any liquid or food inside to absorb the heat, the pot may become damaged or scorched. It is not recommended to heat an empty pot as it can lead to safety hazards and damage to the pot.
A flame sensor is a safety mechanism installed on gas furnaces. It is located directly between the burners and the gas supply. When your gas kicks on, the flame sensor MUST detect a flame. This safety mechanism is to prevent your house from filling up with un-lit gas. Even if your burners are igniting, if your Flame Sensor is dirty (covered in carbon from typical use) it will fault out, thus shutting off the furnace over and over. If this is the case, your furnace will kick on every 2 minutes (because the thermostat tells it your house is too cold) and then will shut off after 5 or 10 seconds as a result of the Flame Sensor Fault.