Nothing. CFCs are no longer used to blow such foams, so no further release of ozone depleting compounds occurs... just because you lower the octane of the gasoline, and make it burn "sooty".
See "What happens to the ozone layer when styrofoam and gasoline is mixed?" in the "Related questions" section below.
You don't push air into Styrofoam.Styrofoam is "foamed" using a liquid blowing agent that is mixed into the liquid styrene resin before molding, this liquid blowing agent then evaporates forming bubbles in the styrene.This blowing agent used to be a freon, but as these can damage the ozone layer they have switched to using HCFC or HFC blowing agents.The bubbles in styrofoam are filled with the gaseous form of the blowing agent, not air!
The fats (i.e. cream) from the milk will dissolve in the gasoline and the the resulting gasoline/cream solution will float on the water from the milk.
No, engine oil is denser than gasoline and will sink to the bottom if they are mixed together. Oil is typically less buoyant compared to gasoline.
Gasoline and turpentine are less dense than water and would float on the surface, while mercury is denser than water and would sink to the bottom when mixed with water.
the first layer is the surface layer it is nice and warm and mixed with the waves. the next layer is the thermocline it is just warm not any thing special. the next is freezing cold i would not want to go there.
No, mixing Styrofoam and gasoline is not an effective or safe way to create a roof sealant. Gasoline is highly flammable and mixing it with Styrofoam can create a dangerous and volatile mixture that can pose a fire hazard. It is recommended to use proper roofing sealants that are designed for the purpose and are safe to use.
It may stick to styrofoam because dish soap mixed with tempera paint it sticks to glass.
How much hydraulic fluid with how much gasoline makes a big difference and was some hydraulic oil mixed into the gas tank or was some gasoline mixed with the hydraulic tank. More info please.
It will not run or if it is mixed with gasoline it will not run correctly and smoke depending on how much diesel was added.
It would depend on the year and make vehicle and how much oil mixed into how much gasoline.
Mixed gasoline typically refers to a fuel mixture that contains gasoline as well as additives or other types of fuel, while regular gasoline is a standard fuel used in most vehicles. Mixed gasoline may have a higher octane rating or contain ethanol, which can impact engine performance. It is important to use the appropriate type of gasoline recommended for your vehicle to ensure proper functioning.
The transition layer between the mixed layer at the surface and the deep water layer.
The engine will smoke a lot due to the oil in the gas and will run real rough.
It is known as gasahol. Ethanol fuel mixed with 15% gasoline is known as E85, though all gas sold in the US has to have some ethanol mixed in by law.
a more darkercolor
The largest temperature change occurs at the base of the mixed layer where it meets the thermocline. This is because the mixed layer is in direct contact with the atmosphere and undergoes rapid temperature changes due to heating from the sun and cooling from wind and evaporation. As the mixed layer interacts with the thermocline, which is characterized by a sharp temperature gradient, the temperature change is accentuated.
Gasoline has a density of around .71g/mL while water's density is 1g/mL so Gasoline floats on Water.