answersLogoWhite

0

First, someone would have changed the plug before that would be possible. 240 Volt receptacles do not accept 120 Volt plugs.

Second, IF someone changed the plug on the compressor, then plugged it in using both legs of the 240 Volt circuit, the compressor motor would self destruct instantly; internal wiring would burn and you would smell the burning insulation.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Natural Sciences

What happens when 240 volt equipment is plugged into a 120 volt source or if 110 120 volt equipment is plugged into a 60 volt source assuming all alternating current?

When equipment is run at a lower voltage than it is designed for, it does not operate correctly. A light will glow dimly or not at all, a heater produces much less heat. Electronic equipment may not function at all.


Does an electrical receptacle draw power?

No the receptacle itself does not consume any power it is just a source of power. No amperage is used until the load is plugged in and turned on. Appliances plugged in with the switch in the off position draw no current. Devices that do not have an off- on switch will start drawing power as soon as they are plugged in. Once an appliance is switched on you are billed for the use of the electricity.


How can a digital clock run using only water as a power source?

Convert the water flow into electricity. Please, no water in digital clocks that are plugged in.


Should an all-in-one scanner be plugged into the wall outlet?

Yes, an all-in-one scanner should be plugged into a wall outlet to ensure proper power supply and functionality. It is recommended to follow the manufacturer's instructions and use the provided power adapter to connect the scanner to a power source.


Does an extension cord use power if nothing is plugged into the other end?

If there is no load plugged into the cord there will be no power consumed. The only time the resistance of the cord will come into effect is when the circuit becomes energized through the load plugged into the end of the cord.

Related Questions

What happens when 240 volt equipment is plugged into a 208 volt source?

It should be ok


What happens when 220 volt equipment is plugged into a 110 volt source or if 110 120 volt equipment is plugged into a 60 volt source assuming all alternating current?

temporary it blows or KABOOOMM....


Can you use an airbrush without an aircompresor?

We use our airbrushes at airbrush tattoo events with a standard Co2 tank. It is just compressed air and doesn't require a compressor or a power source.


What happens when a 110 volt lamp is plugged into a 240 volt source?

A bright flash and a dud bulb, possibly a blown fuse instead.


What happens when an ac transformer attached to ac appliance is plugged into dc power source?

it depends on the transformer size and the period of time involved if continuous it should just blow the breaker and itself.


Can leaving electrical appliances plugged in cause fires?

No, A plugged in appliance will not cause a fire. There has to be an outside fuel source that could catch the flame.


How do you listen to your an on a 2007 Passat There is an auxilary jack with the car but when it's plugged in the ipod nothing happens?

try changing the setting or, press the source button, which should change it from either radio or CD to auxilary.


What happens when 240 volt equipment is plugged into a 120 volt source or if 110 120 volt equipment is plugged into a 60 volt source assuming all alternating current?

When equipment is run at a lower voltage than it is designed for, it does not operate correctly. A light will glow dimly or not at all, a heater produces much less heat. Electronic equipment may not function at all.


What is the energy source of a toaster?

The energy source of a toaster is electricity. When plugged in, the toaster uses electrical energy to heat the heating elements, which then toast the bread placed inside.


Is it Normal For Gateway Desktop 300w Power supply to turn on automatically when plugged into power source?

Yes, that is normal.


How do you connect your Advent AW 400 wireless stereo speakers?

The AW400 wireless speakers have a transmitter module. This module is plugged into your sound source (your TV or stereo or whatever). Each of the speakers is then plugged into the wall with its own power cord.


Rca tv will not come on?

Please ensure power cord is plugged in to Active power source before trying to switch on appliance