answersLogoWhite

0

What else can I help you with?

Continue Learning about Natural Sciences

Could dampness or humidity in a room cause a Ground Fault outlet to kick off?

Dampness or humidity in a room can potentially cause a ground fault circuit interrupter (GFCI) outlet to trip if water gets into the outlet or if there is condensation on the wiring. It is important to address any issues of moisture near outlets to prevent electrical hazards.


What happens to the surface at a strike slip fault?

The rock gets farther a part from the fault


What is a silver screw in a new wall receptacle for?

The screw is actually only silver in color and it is where the neutral wire(s) get connected to, (white wire). the gold colored screw gets connected to the positive(black or red) wire(s). Green screw is for ground wire.


What is an electrical fault?

Some people will define the cause of an electrical fault as a "short circuit" but that is too simple an explanation because it doesn't explain how it is caused. An electrical fault is the name given to any situation where some electrical current goes where it was not intended to go. This situation can be caused by damage to the protective insulation around a wire - or around some other part - which puts the wire or part in contact with a different wire or part that it was not designed to touch because a difference in voltage has to exist between them to allow an item of electrical equipment to do its work. If an item of electrical equipment gets dropped accidentally - or if something else hits it violently - that action can easily damage the insulation material or close an air gap that was designed to keep two parts electrically separate within that item of equipment. Another way an electrical fault can be caused is by physical deterioration of some insulation. Such deterioration can be caused by many factors such as, for example, the temperature of the equipment being too high or if some unprotected equipment is exposed to wet or damp conditions. Such factors can put stresses on the insulation which it was not designed to withstand and it breaks down and causes an electrical fault to occur. If an item of electrical equipment (or an electrical wiring circuit which connects different pieces of equipment together) is properly designed, then, if an electrical fault occurs, protective circuit breakers should trip and/or fuses should blow to stop the flow of any excessive current that is the result of the electrical fault, thus helping to prevent any fires and/or explosions from happening because the fault occurred.


Can a gfci get weak and trip from over load?

First, lets say this: GFCI stands for Ground-Fault Circuit Interupter. This is NOT an over-current device, and NOT an over-load device. This device stop the flow at 6mA (6/1000 of an amp) of leakage current - current leaking to ground from either the hot or neutral wire. Do you mean a GFCI breaker or a GFCI receptacle?? GFCI receptacles do not "trip on overload". Period. The only over-current protection on a receptacle is provided by the circuit breaker protecting that branch circuit. GFCI breakers are ALSO over-current devices just like normal breakers. And yes, they DO get weak, just like standard breakers do from repeated tripping. They basically have a metal strip inside that gets bent and straightened each time you trip & reset the breaker. All metal gets weak when it gets bent & straightened repeatedly. It is called "metal fatigue".

Related Questions

What happens when electricity gets to the ground?

When electricity reaches the ground, it dissipates and seeks a path of least resistance to ground itself. This can cause a short circuit, create a dangerous electrical shock hazard, or even cause a ground fault that may trip a circuit breaker. It is important to ensure that electrical systems are properly grounded to prevent such incidents.


What happens to rocks along to reverse fault?

The rock gets farther a part from the fault


Common electrical fault on Daewoo matiz?

My car is driving and then when it gets warm it lose power what can bethe fault


What is the difference between a fault and a fold?

a fault is a large crack in the earth. a fold is when the ground gets bent.


Could dampness or humidity in a room cause a Ground Fault outlet to kick off?

Dampness or humidity in a room can potentially cause a ground fault circuit interrupter (GFCI) outlet to trip if water gets into the outlet or if there is condensation on the wiring. It is important to address any issues of moisture near outlets to prevent electrical hazards.


What happens to the surface at a strike slip fault?

The rock gets farther a part from the fault


When you turn a toaster on what happens to the electrical?

The electrical energy gets transformed into electromagnetic (light) energy and thermal (heat) energy.


What is a silver screw in a new wall receptacle for?

The screw is actually only silver in color and it is where the neutral wire(s) get connected to, (white wire). the gold colored screw gets connected to the positive(black or red) wire(s). Green screw is for ground wire.


What happens when a licensed driver gets into an accident and does not have insurance?

They can be sued by the other driver for damamges (if at fault). If not at fault, they may have a very difficult time getting insurance in the future and when they do, the premiums will be through the roof.


What happens to the body of the parrot when it gets buried?

It gradually decomposes, just as all lifeforms do when buried in the ground.


What happens to your waste after you go the the bathroom on an airplane?

It goes into a holding tank and gets pumped out when the aircraft is on the ground.


What happens if you have no driving license and you were in an car accident and it wasn't your fault?

Why were you driving without a license? You will be prosecuted for the violation but it has nothing to with fault. If the other party was at fault their insurance is responsible for damages to your car. You will never get your license back. Habitual gets you jail time.