When heat is added to a sample of water in an insulated container, the water's temperature increases as the added energy is absorbed. This energy causes the water molecules to move more rapidly, leading to an increase in thermal energy. If enough heat is added, the water may eventually reach its boiling point, leading to a phase change from liquid to vapor. However, in an insulated container, no heat is lost to the surrounding environment, so all the added heat contributes to increasing the water's temperature or causing a phase change.
It rises, because you have packed more atoms into the same space.
To dilute a urine sample, you can mix it with distilled water or a diluent solution in a clean container. The amount of diluent added will depend on the desired dilution ratio. Make sure to mix the sample thoroughly before testing.
When heat is added to gas in a sealed container, the temperature of the gas increases, causing the gas particles to move faster and collide more frequently with the container walls. This leads to an increase in pressure inside the container due to the increased force exerted by the gas particles on the walls.
when cold and warm air are added in the same container it causes water.
The pressure inside of a container when nitrogen gas is added depends on:what the pressure was before the gas was addedhow big the container ishow much nitrogen gas is addedthe temperature of the gas before it is addedthe temperature of the container and its contents
increases
Placing a rock in a container does not alter the volume of the container, although it does occupy some of that volume.
it decreases.
It rises, because you have packed more atoms into the same space.
When gas is added to a rigid container using a pump, the pressure inside the container will increase due to the increase in the number of gas molecules colliding with the container walls. The temperature inside the container may also increase slightly due to the compression of the gas. The volume of the gas in the container will remain constant since the container is rigid and unable to expand.
To dilute a urine sample, you can mix it with distilled water or a diluent solution in a clean container. The amount of diluent added will depend on the desired dilution ratio. Make sure to mix the sample thoroughly before testing.
When heat is added to gas in a sealed container, the temperature of the gas increases, causing the gas particles to move faster and collide more frequently with the container walls. This leads to an increase in pressure inside the container due to the increased force exerted by the gas particles on the walls.
the proteins will go away when the sample is added
when cold and warm air are added in the same container it causes water.
When silver nitrate is added to carbon tetrachloride, the silver nitrate will not dissolve as it is insoluble in carbon tetrachloride. The two substances will remain separate, with the silver nitrate forming a precipitate at the bottom of the container.
after 5.63 gm sample of wood metal was added in a 10ml graduated cylinder the new water level is 8.7ml "http://wiki.answers.com/Q/Was_the_water_in_a_cylinder_before_the_sample_was_added" after 5.63 gm sample of wood metal was added in a 10ml graduated cylinder the new water level is 8.7ml "http://wiki.answers.com/Q/Was_the_water_in_a_cylinder_before_the_sample_was_added"
See your medical practitioner. They will most likely provide you with a sterile specimen container to collect a sample. This sample will then be sent to the laboratory for microscopy, culture, and sensitivity testing (M/C/S). If tuberculosis (TB) is suspected then acid-fast bacilli (AFB) will also be added to the request form.