When current is increased during electrorefining of a metal, more electrons are sent into the solution. This causes more metal ions to be displaced at one time, increasing the rate that metals will separate out. So, the process just happens faster with more current.
Current i.e.rate of flow of charge when stops flowing in a circuit then fuse does not blows out. The only work of fuse is to blow away when the current starts flowing greater in magnitude than the rated current value.
][][][
it goes throuh space
The electrical potential energy increases as the voltage is increased. It further excites the filament in the bulb more than a lessor voltage would. Using good old ohm's law (Voltage = Current x Resistance), a larger voltage applied to a bulb at the same resistance increases the current proportionally and larger currents has the effect to cause higher temps in conductors
A decrease in radiative equilibrium temperature
The magnitude of the vibration of its molecules gets increased.
If resistance is increased, current decreases. Ohm's Law: current equals voltage divided by resistance.
The flow of electrons meets an increased impedance to it's flow.
The flow of electrons meets an increased impedance to it's flow.
If resistance is increased, current decreases. Ohm's Law: current equals voltage divided by resistance.
When the direction of current is reversed, the heating effect remains the same. The amount of heat generated is determined by the magnitude of the current and the resistance in the circuit, independent of the direction of the current flow.
In this case current flows from a high voltage to a lower voltage in a circuit.
depends on the simple circuit. please describe it.
If resistance is increased, current decreases. Ohm's Law: current equals voltage divided by resistance.
The strength is increased, this is how Roller Coasters operate.
As voltage is increased, the electric current in a wire also increases because the relationship between voltage, current, and resistance is described by Ohm's Law (V = IR). If resistance remains constant, a higher voltage will result in a higher current flowing through the wire.
Current i.e.rate of flow of charge when stops flowing in a circuit then fuse does not blows out. The only work of fuse is to blow away when the current starts flowing greater in magnitude than the rated current value.