8mm is almost exactly 5/16 inch. The wrenches are interchangable.
There are 25.4 millimetres in one inch. Therefore, rounded to two decimal places, 8 millimetres is equal to 8 / 25.4 = 0.31 inches.
10 mm = 1 cm 8 mm = 0.8 cm now 2.54 cm = 1 inch 0.8 cm = 0.8 / 2.54 = 0.31 inch Direct Conversion Formula 8 mm* 1 in 25.4 mm = 0.3149606299 in
7mm is just over 1/4 an inch.Direct Conversion Formula7mm*1 in25.4 mm=0.2755905512in7 millimeters0.275590551 inches ==Direct Conversion Formula7 mm*1 in25.4 mm=0.2755905512in7 millimeters = 0.275 inches.Direct Conversion Formula 7 mm*1 in25.4 mm=0.2755905512 in0.27559"Direct Conversion Formula7mm*1 in25.4 mm=0.2755905512in
22 millimeters is 0.87 inch.
1 inch = 25.4 millimeter 8 mm = 8/25.4 = 0.315 inch Direct Conversion Formula 8.0 mm* 1 in 25.4 mm = 0.3149606299 in
A drill bit size of .376 inches is equivalent to a 3/8 inch drill bit, which is slightly smaller than 3/8 inch (0.375 inches) and larger than 13/32 inch (0.40625 inches). In metric terms, this is approximately 9.55 mm. It’s important to choose the right drill bit size based on the specific requirements of your project.
0.31 inchANS 2 - or, in fractions, 5/16 ths
The recommended drill bit size for a 5/16 inch screw is 1/8 inch.
A # 30 drill bit is 0.1285 inch, or fractionally more than a 1/8 bit.
A 10 cm hole is almost 4 inches ! ! - IF you meant 10mm, then that's a little over 3/8 of an inch, or 13/32 for a clearance hole.
It's 0.1160 of an inch, or a tiny,tiny bit less than 1/8 inch.
That size is correctly 0.375, and is equal to 3/8 of an inch.
A drill bit size typically used for drilling holes in metal is measured in fractions of an inch, such as 1/16 inch, 1/8 inch, or 1/4 inch.
The recommended drill bit size for installing cabinet hardware with a 8 screw is 11/64 inch.
There are 25.4 millimeters in an inch, so 8 mm is a bit less than 1/3 of an inch.
For drilling into metal, use a Phillips head drill bit that is 1/8 inch in size.
The recommended size of the pilot drill bit for drilling holes in metal surfaces is typically 1/8 inch to 1/4 inch in diameter.