1.628 mm
The equivalent American Wire Gauge (AWG) size for 2.3 mm of copper wire is approximately 10 AWG. In metric terms, 2.3 mm is about 0.0906 inches, which aligns closely with the diameter of 10 AWG wire. This size is commonly used for various electrical applications, providing a good balance between conductivity and physical robustness.
It's ok up to 30 amps.
The current rating for a 0.1 mm varnished copper wire would typically be very low, likely in the range of microamps to milliamps due to its small diameter. It is important to refer to manufacturer specifications or industry standards for precise current ratings for different wire gauges.
Copper wire sent for recycling is remelted and rerefined. It becomes a new copper product one of which might be new copper wire.
depends on the content of the copper wire, if its 100% usually it will
10 amps
A 35 sq mm copper wire with an insulation factor of 75 or 90 degrees C is rated at 115 and 120 amps respectively.
yes
It can carry upto 100 Ampere.
It will taken 8 amps <<>> The conversion of 2.5 sq mm wire to AWG is equal to a #12 wire. The ampacity of a #12 copper wire with an insulation factor of 90 degrees C is 20 amps.
1.5 sq mm
A copper wire by itself won't generate any electricity at all. You'll need to have a length or a loop of it moving through/surronded by a magnetic field before you can get a voltage out of it.
It's ok up to 30 amps.
whty is copper wire not better than wire on a electromagnet whty is copper wire not better than wire on a electromagnet whty is copper wire not better than wire on a electromagnet whty is copper wire not better than wire on a electromagnet whty is copper wire not better than wire on a electromagnet
how much copper is in copper wire
The current rating for a 0.1 mm varnished copper wire would typically be very low, likely in the range of microamps to milliamps due to its small diameter. It is important to refer to manufacturer specifications or industry standards for precise current ratings for different wire gauges.
No. Copper wire is a solid