0.03 mm equates to approximately 0.00118 inches.
Direct Conversion Formula
0.03
mm
*
1 in
25.4 mm
=
0.001181102362
in
By the unit of conversion 1 inch=2.54 mm. so,0.38 inch=0.38* 2.54=9.652 mm.
The conversion between m and inch are given .On finding the relation we get as follows. 1 mm =0.0393 inch . So,38 mm=1.49 inches.
25.4 mm in an inch
There are 25.4 millimeters in one inch.
1.496062992 in Direct Conversion Formula 38 mm* 1 in 25.4 mm = 1.496062992 in
By the unit of conversion 1 inch=2.54 mm. so,0.38 inch=0.38* 2.54=9.652 mm.
No, it is way too big for a pilot hole as 5 mm = 0.20 inch which is smaller than .38 inch
1.49606299 inchesDirect Conversion Formula 38 mm*1 in25.4 mm=1.496062992in
The conversion between m and inch are given .On finding the relation we get as follows. 1 mm =0.0393 inch . So,38 mm=1.49 inches.
38.1 millimeters There are 25.4 mm to an inch.
If you mean the 9 mm Parabellum AKA 9x19 mm or 9 mm "Luger", the .38 Special is physically larger. The case length of the .38 is 0.401 inches longer. The over all loaded cartidge length of the .38 is 0.381 inches longer. Case diameter is nearly identical between the two, but the .38 has a larger rim/case head by 0.046 inches. The 9 mm fires a 0.355 inch diameter bullet whereas the .38 fires a 0.357 inch diameter bullet.
1 inch = 25.4 mm 1 mm = 0.03937 inch
25.4 mm in an inch
38 mm = 3.8 cm
To convert millimeters to inches, you can use the conversion factor where 1 inch is equal to 25.4 millimeters. Therefore, to convert 38 mm to inches, you divide 38 by 25.4, which equals approximately 1.5 inches. So, a diameter of 38 mm is about 1.5 inches.
25806.4 mm in an inch
1 inch = 25.4 mm (rounded) 0.75 inch = 19.05 mm (rounded)