5.0 liters is 305.119 cubic inches.
1 litre =61 cubic inches
4.8 liter = 292.913972 cubic inches
A 6.0 liter GM motor would be larger in size compared to a 5.7 liter motor. To convert 6.0 liters to cubic inches, you can use the rule of 61.0237 cubic inches per liter. Therefore, a 6.0 liter GM motor would be approximately 366 cubic inches in size.
There are 444 cubic inches in a 7.3 liter powerstroke diesel. The measurement is 1 liter = 61 ci. Which makes a 7.3 = 445, but I am assuming that a 7.3 is a round off of 7.278 liters, since 7.3 is easier to say.
There are 61.02 cubic inches per liter. So, 2.00L = 2.00 x 61.02 = about 122 cubic inches. (or 2000cc)
50 liter = 3 051.187 204 7 cubic inch
1 liter = 61 cubic inches.
360 cubic inches. Roughly 61 cubic inches in a liter.
1 liter has 61,02374 cubic inches.
1 litre =61 cubic inches
1 liter = 61.0237441 cubic inches6.0L = 366 cubic inches
134 cubic inches ( approximately 61 cubic inches per liter )
A 6.0 Cubic liter engine is APX. 366 cubic inches. A 5.3 liter engine is 323 (advertised as a 327) cubic inches. A 8.1 liter is 494 cubic inches.
A 350 engine has 3 hundred and 50 cubic inches. A 6.0L has 3 hundred and 64 cubic inches. 14 cubic inches of difference.
61.02 cubic inches per liter.
To convert liters to cubic inches, you can use the conversion factor that 1 liter is approximately 61.024 cubic inches. Therefore, an 8.0 liter Chevrolet motor would be about 488.2 cubic inches (8.0 liters × 61.024 cubic inches/liter).
14.8 cubic feet = 25,574.4 cubic inches.