The area of any circle is (pi) x (radius)2 .
A 2-meter telescope has a radius of 1 meter. So its area is
(pi) x (1)2 = 3.1416 square meters = about 33.8 square feet.
A 1 m telescope has a collecting area of pi x 1 x 1 = 1 piA 3 m telescope has a collecting area of pi x 3 x 3 = 9 pi.Therefore, the bigger telescope collects 9 times as much light.
The SI unit of area is the square meter (m2), which is a derived unit.
To determine the volume of 1 meter of 28mm pipe, we first calculate the cross-sectional area of the pipe. The radius is 14mm (0.014 meters), and the area is given by the formula (A = \pi r^2). This results in an area of approximately 0.00061575 square meters. Multiplying this area by the length of the pipe (1 meter) gives a volume of about 0.00061575 cubic meters, which is equivalent to approximately 0.61575 liters.
A meter is a length, a square meter is an area. One is not equivalent to the other.The question, as stated, cannot be answered sensibly. A square metre is a measure of area, with dimensions [L2]. A metre is a measure of distance, with dimensions [L]. The two measure different things and elementary dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information.A metre is a unit of length. A square metre is a unit of area. The two units are therefore incompatible.Other possible answersAn area of 1 square meter could measure 1 meter by 1 meter, or 2 meters by 1/2 a meter, or 10 meters by 0.1 meter...A square metre is a measure of area, with two dimensions, length and width [L2]. A metre is a measure of distance, with one dimension [L]. The two measure different things and basic dimensional analysis teaches that you cannot convert between measures with different dimensions such as these.A square metre is a measure of area, with two dimensions, length and width [L2]. A metre is a measure of distance, with one dimension [L]. The two measure different things and basic dimensional analysis teaches that you cannot convert between measures with different dimensions such as these.
That is no good question. A cubic meter shows a volumeand a square meter shows a flat area. There is no calculation for conversion possible
A 1 m telescope has a collecting area of pi x 1 x 1 = 1 piA 3 m telescope has a collecting area of pi x 3 x 3 = 9 pi.Therefore, the bigger telescope collects 9 times as much light.
1 square meter is the area of a square, that has 1 meter on every side. Also, any other figure that has the same surface area, for example, a rectangle of 1/2 meter times 2 meters.1 square meter is the area of a square, that has 1 meter on every side. Also, any other figure that has the same surface area, for example, a rectangle of 1/2 meter times 2 meters.1 square meter is the area of a square, that has 1 meter on every side. Also, any other figure that has the same surface area, for example, a rectangle of 1/2 meter times 2 meters.1 square meter is the area of a square, that has 1 meter on every side. Also, any other figure that has the same surface area, for example, a rectangle of 1/2 meter times 2 meters.
It is 25x2 which equals 50m
8 square meters
Yes. A meter is a unit of length (1 dimension), a square meter is a unit of area (2 dimensions).
Surface area = 50.26548 m2
Area
The SI unit of area is the square meter (m2), which is a derived unit.
2 square cm\meter square of body surface area.
Area of a circle = pi*r*r so about 12.56636 square meters
1 meter (m) = 3.281 feet (ft) (1m)2 = (3.281ft)2 =10.76ft2The area of one square meter is 10.76391 square feet.
565.5m^2