0
What else can I help you with?
Can you run a 50 watt halide bulb on a 100 watt halide ballast?
No, it is not recommended to run a 50 watt halide bulb on a 100 watt halide ballast. The ballast should match the wattage of the bulb to ensure proper operation and to avoid potential damage to the bulb and ballast. It is best to use a ballast that is rated for the wattage of the bulb being used.
How many lux in a 1000 watt bulb?
Incandescent bulbs give about 10 lumens of light per watt of electric power Halogens give about 13 lumens per watt CFLs give about 50 lumens per watt So it depends on the type of bulb.
Lumens in a 50 watt bulb?
It depends on the specific lamp. The packaging the lamp comes in should tell you what the lumen output is. This in a common question as people want to compare LED replacements. You can use 600 lumen as a good guide for comparison for a 50 Watt halogen.
Is 650 lumen's bright?
A 50 watt incandescent bulb is about 650 lumens.
How many 12 volt 50 watt bulbs can be used on the 100 va transformer?
To determine how many 12-volt, 50-watt bulbs can be used on a 100 VA transformer, first convert the transformer's capacity from VA to watts, which is effectively the same for resistive loads (100 watts in this case). Each 50-watt bulb requires 50 watts, so you can divide the total available watts by the wattage of one bulb: 100 watts ÷ 50 watts/bulb = 2 bulbs. Therefore, you can use 2 of the 12-volt, 50-watt bulbs on a 100 VA transformer.
Which would use more energy a 50 watt bulb or a 75 watt bulb?
A 75 bulb will use more electricity.
Can you use a 50 watt halogen bulb for a 100 watt halogen bulb?
Yes. It just won't be as bright.
Low voltage 50 watt bulb use same electricity as 50 watt incandescent?
Yes
Do a 12 volt 50 watt bulb and a 230 volt 50 watt bulb draw the same current?
No, they do not draw the same current. The current drawn by an electrical device is determined by the power (Watts) and voltage (Volts) using the formula: Current (amps) = Power (Watts) / Voltage (Volts). So, the 12 volt 50 watt bulb will draw higher current compared to the 230 volt 50 watt bulb.
Can you run a 50 watt halide bulb on a 100 watt halide ballast?
No, it is not recommended to run a 50 watt halide bulb on a 100 watt halide ballast. The ballast should match the wattage of the bulb to ensure proper operation and to avoid potential damage to the bulb and ballast. It is best to use a ballast that is rated for the wattage of the bulb being used.
How many lux in a 1000 watt bulb?
Incandescent bulbs give about 10 lumens of light per watt of electric power Halogens give about 13 lumens per watt CFLs give about 50 lumens per watt So it depends on the type of bulb.
What size headlight bulb does a Honda Pilot take?
Probably a 50 watt halogen
Lumens in a 50 watt bulb?
It depends on the specific lamp. The packaging the lamp comes in should tell you what the lumen output is. This in a common question as people want to compare LED replacements. You can use 600 lumen as a good guide for comparison for a 50 Watt halogen.
Is 650 lumen's bright?
A 50 watt incandescent bulb is about 650 lumens.
What is the closest comparison to determine if a 10 watt halogen bulb will be enough light in outdoor lighting?
No, it will not be. You will need at least a 50 watt halogen for outdoor lighting.
What one is brighter a 60 watt light bulb or a 100 watt light bulb?
If the two bulbs use the same technology the 100 w bulb is 10/6 times brighter than the 60 w. Incandescent bulbs give about 10-12 lumens per watt Halgogen gives about 15-18 lumens per watt CFL (low-energy) gives about 50 lumens per watt.
How many amps in a 50 watt light bulb?
To find the current in amps for a 50-watt light bulb, you can use the formula ( I = \frac{P}{V} ), where ( I ) is the current in amps, ( P ) is the power in watts, and ( V ) is the voltage in volts. For example, if the bulb operates at 120 volts, the current would be ( \frac{50}{120} ), which equals approximately 0.42 amps. If the bulb operates at a different voltage, simply adjust the voltage in the formula accordingly.
