0
What else can I help you with?
What is themost common wire used for a door contact?
The most common wire used for a door contact is 22-gauge stranded wire. It is flexible, easy to work with, and provides reliable connections for door contact sensors.
Why is copper wire used in home building?
It is flexable, an excellent electrical condictor, easy to work with and relatively cheap.
What size wire and circuit breaker for a 2000 watt 220 heater?
Answer for USA, Canada and countries running a 60 Hz supply service.The wire size and breaker are determined by the amperage on the conductor used to feed the load. Amps = Watts/Volts. 2000/220 = 9 amps. The breaker used to feed this size load will be a two pole 15 amp breaker. A #14 two conductor cable is rated at 15 amps but has to be de-rated by 80% for continuous loads. 15 x .8 = 12 amps. This de-rating is still within the amperage you need to run the heater. There is in the market place now a two wire cable that uses red and black colour coding for electric heating. If you just have a cable with black and white colour coding identify the white wire by wrapping a piece of black tape on both ends around the wire to signify that the cable is used for 220 volts. This keeps the next person that opens the splice safe, as it tells the person that the white wire is not a neutral wire and that the wire is to be consider as a "hot" wire.As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliancesalways use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
Do you need a neutral wire for a light to work?
In most cases, yes. A neutral wire is usually required for a light to work properly, as it completes the circuit and allows electricity to flow to and from the light fixture. If there is no neutral wire, the light may not function correctly or at all.
On a 1987 Chevy pickup 350 what wire is used for a tach not hei?
For a 1987 Chevy pickup with a 350 engine and a non-HEI ignition system, the wire that is typically used for connecting a tachometer is the green wire located on the distributor cap. This wire provides the signal needed for the tachometer to work accurately. Make sure to consult the vehicle's manual or a wiring diagram to locate the specific wire on your truck.
Which would be more work pulling a wheeled suitcase or carrying a suitcase?
pulling a wheeled suitcase. carrying a suitcase is not scientifically categorized as work.
When you are sprinting with a suitcase when is work being done on your suitcase?
Technically, no; work is performed when lifting the suitcase, but not when holding it level. Work IS performed to accelerate the suitcase at the beginning of the sprint, when turning or climbing stairs, and to slow it down at the end; but carrying the suitcase at a constant velocity and constant height is not "work".
When you pull a suitcase with wheel why does only part of your force do work?
This is because if its a suitcase with wheels, half of your body is pushing\pulling the suit case while the wheels are doing some of the work too. This is why when you have a backpack with wheels, it seems lighter than having it on your back.
What is a bag carried to work called?
A suitcase
What do you do if there is a suitcase next to your tamagotchi?
the want to go to work
What colour wires are used to make the TV work?
Color has nothing to do with it. Its' the wire type and application that determines the types of wire used.
True or false setting a heavy suitcase down on the ground requires you to do negative work on it?
False. Setting a heavy suitcase down on the ground does not require you to do negative work on it. Work is only done when you apply a force to an object and move it over a distance in the direction of the force applied. Simply placing the suitcase on the ground does not involve any work being done.
When you pull a suitcase with wheels does only part of your force do work?
g
Can galvanized steel wire be used for jewelry craft?
Yes, any wire can be used for jewelry craft. It all depends on the effect you want to have in your design. If you are going for fine jewelry, of course it would be better if you used silver wire. However, especially for trial beading, the less expensive wire will work just fine. I would suggest that you work carefully as steel wire is less flexible than beading wire and can "bite" you.
How do wire feed welders work?
Wire feed welders operate by continuously feeding a spool of welding wire through a gun to create an electric arc between the wire and the workpiece. This arc generates intense heat, melting both the wire and the base material, allowing them to fuse together. The welder typically uses a shielding gas to protect the molten weld pool from contamination. This process allows for efficient, consistent, and automated welding, making it popular in various applications.
What is the correct wire feed for a mig welder?
If the feed is too fast it will push your hand away from the work. If the feed is too slow the wire will burn back to the tip. Set your wire speed to your voltage setting by ear. When you hear the sound of bacon sizzling in the pan you are set. If you hear a lot of popping the speed is to fast. If it is to slow you will have trouble keeping the arc going. If you are welding at 23 volts start with a wire speed of about 140 IPM (Inches Per Minute). That's ball park, since every machine and every person is different.
What is themost common wire used for a door contact?
The most common wire used for a door contact is 22-gauge stranded wire. It is flexible, easy to work with, and provides reliable connections for door contact sensors.
